ADTRAN Network Card 1000 239 HRE User Manual

JOBAID  
®
TOTAL ACCESS 1000 239 HRE  
61179513L1-22A  
0212  
LOOPBACK AND CONTROL CODES  
LED STATUS  
239 HRE  
FUNCTION  
CODE  
RESPONSE  
ICOT and HRE(s) will arm and the HLIU will loop up toward the network.  
CLEI: VAR1FC0B_ _  
NETWORK  
ARM (in-band)  
11000 (binary)  
LP1 / LP2  
G OFF  
No synchronization with the ICOT.  
ARM (ESF Data Link)  
FF48 (hex) or 1111 1111  
0100 1000 (binary) sent ICOT and HRE(s) will arm and the HLIU will loop up toward the network.  
in the Facility Data Link  
G GREEN  
G YELLOW  
G RED  
Synchronized with good signal quality on NET Loop 1/Loop 2  
(> 2 dB margin).  
Disarm (in-band)  
11100 (binary)  
All units are removed from the armed state and loopbacks will be released.  
Synchronized with marginal signal quality on NET Loop 1/Loop 2  
(1 to 2 dB margin).  
Disarm (ESF Data Link) FF24 (hex) or 1111 1111  
0010 0100 (binary) sent in All units are removed from the armed state and loopbacks will be released.  
the Facility Data Link  
Synchronized with poor signal quality on NET Loop 1/Loop 2  
(0 dB margin).  
1
Activation ICOT  
D3D3 (hex) or  
1101 0011 1101 0011  
(binary)  
If received while in an armed state, the ICOT will loop toward the network.  
CUSTOMER  
LP1 / LP2  
G OFF  
G GREEN  
No synchronization with the RT.  
Loop down w/out  
9393 (hex) or  
Automatically releases without disarming any ICOT and HRE that may be in  
1001 0011 1001 0011 (binary) loopback toward the network.  
Synchronized with good signal quality on CUST Loop 1/Loop 2  
(> 2 dB margin).  
2
disarming  
1
HRE Network Loop up  
C741  
If an HRE is present and units armed, the HRE will loop up toward network..  
(1100 0111 0100 0001)  
G YELLOW  
G RED  
Synchronized with marginal signal quality on CUST Loop 1/Loop 2  
(1 to 2 dB margin).  
1
HLIU Loop up  
C742  
If received while in an armed state, the HLIU will loop toward the network..  
(1100 0111 0100 0010)  
Synchronized with poor signal quality on CUST Loop 1/Loop 2  
(0 dB margin).  
1 Units must be armed with 11000b or FF48h before this code will work.  
2 In order to behave like an NIU, the HLIU will not loop down from the network side with 9393h.  
NOTE: All codes listed above must be sent for a minimum of 5 seconds in order for them to be detected and acted upon.  
LL / RL  
G OFF  
G YELLOW  
G GREEN  
No active arming or loopback is detected at the HRE.  
Indicates LB from HRE toward the network is active.  
Indicates LB from HRE toward the customer is active.  
Card Edge Pin Assignment  
Pin  
1
2
3
4
5
6
7
8
Designation  
Description  
Ground  
No Connect  
HDSL LOOP SPECIFICATIONS FOR OPTIMUM OPERATION  
GND  
NC  
T1  
R1  
T1  
R1  
NC  
T
G Cable pairs must be nonloaded  
Customer Loop 1 Tip  
Customer Loop 1 Ring  
Network Loop 1 Tip  
Network Loop 1 Ring  
No Connect  
Network Loop 2 Tip  
Network Loop 2 Ring  
Ground  
G No single Bridged Tap > 2 kft  
G Maximum loop resistance is 800  
G Pulse attenuation (LOSS on HDSL Current System Status screen) < 30 dB  
G Impulse noise < 50 dBrn as measured using a 50 kb filter  
G Total Bridged Tap < 2.5 kft  
9
R
GND  
T
G 196 KHz insertion loss < 35 dB  
10  
11  
12  
G Signal quality of 6 dB or higher, with no fluctuation and equal on both loops  
G Wideband Noise < 31 dBrn as measured using a 50 kb filter  
G Internal Clock Accuracy +25 ppm (exceeds Stratum 4)  
Customer Loop 2 Tip  
Customer Loop 2 Ring  
R
C A U T I O N !  
SUBJECT TO ELECTROSTATIC DAMAGE  
OR DECREASE IN RELIABILITY.  
GGGFor a complete Installation and Maintenance Practice (P/N 61179513L1-5): (877) 457-5007, Faxback Document 900. Please have your fax number ready. G  
HANDLING PRECAUTIONS REQUIRED.  
 

3Com Network Router WL 603 User Manual
Abocom Network Card PLE0085I User Manual
Addlogix Power Supply RPS14 User Manual
AEG Freezer C 7 14 40 I User Manual
Alpine CD Player CDM 7856R User Manual
Asus Car Video System VN289 User Manual
Asus Computer Hardware 90MB0F30M0AAY0 User Manual
Atmel Computer Hardware AT89C5132 User Manual
Behringer Car Amplifier NU1000 User Manual
Behringer Music Pedal UM300 User Manual