Addonics Technologies Computer Drive AD5U2SA User Manual

ADDONICS TECHNOLOGIES  
Model: AD5U2SA  
Installation Guide  
USB Ports  
SATA Ports  
SATARAID Management Utility Installation  
Note:  
If you are configuring RAID sets, in addition to  
installing the driver, you need to install the  
SATARAID Management Utility to configure and  
monitor the RAID sets. Install the utility from the CD  
that came with your package FIRST before  
installing the SATA host controller.  
1. Turn computer ON. Insert Driver Disk into CDROM.  
2. The Addonics Technologies Driver Disk window pops  
up.  
3. Select SATA RAID Utilities. To download the utility  
select model of the controller from the list.  
4. Extract the files into your system.  
USB Ports  
5. Install VC2005 Redistributables  
i. For 32-bit platforms, execute vcredist_x86.exe  
ii. For 64-bit platforms, execute vcredist_x64.exe  
6. Install .Net Framework 2.0  
i. For Windows 2000/XP/2003, Execute dotnetfx.exe  
ii. For Windows Vista, skip this step.  
7. Install SATARaid Utility 1.0.0.26  
i. Execute InstallSATARaid.exe and follow the on  
screen directions.  
8. Follow the AD5U2SA Windows Driver installation.  
The SATARAID Utility Manual can found in the Driver Disk  
under User Guides or can be downloaded from  
ntroller/SATARaid-Manual_v1.03.pdf  
Confirming Serial ATA Driver Installation  
1. Right click the My Computer icon and select Properties.  
2. Click Device Manager in the Menu Tree.  
3. Click the “+” sign in front of SCSI and RAID Controllers.  
You should see Silicon Image SiI 3112 SoftRaid  
Controller.  
Types of Bus Slots  
AD5U2SA Windows Driver Installation for USB  
PCI  
PCI  
Note:  
For Windows 2000, XP, 2003 & Vista systems, the  
AD5U2SA is a Plug and Play device. It will be using  
the built-in drivers  
Confirming USB Driver Installation  
1. Right click the My Computer icon and select Properties.  
2. Click Device Manager in the Menu Tree.  
3. Click the “+” sign in front of Universal Serial Bus  
Controllers.  
You should see:  
NEC PCI to USB Open Host Controller  
NEC PCI to USB Open Host Controller  
Standard Enhanced PCI to USB Host Controller  
AD5U2SA Windows Driver Installation for SATA  
Note:  
If you are only configuring independent drives using  
the host controller all you need to install is the  
driver. This controller connects to a PCI slot.  
TECHNICAL SUPPORT  
1. Connect the SATA host controller to an available PCI  
slot.  
2. Turn computer ON. When Windows boots up, the  
“Found New Hardware Wizard” pops on the screen and  
the Silicon Image SiI 3112 SoftRaid Controller is  
identified.  
Addonics Technologies  
2466 Kruse Drive  
San Jose CA 95131  
Phone: 408 433-3899  
Fax: 408 433-3898  
Email:  
Internet:  
3. Place the Driver Disk on your optical drive. Select  
automatically look for driver on the wizard.  
4. Wait while the wizard installs the software…  
5. After driver installation, it is recommended to restart  
your system.  
Technical Support (8:30 am to 6:00 pm PST)  
Phone:  
Email:  
408 433-3855  
 

Acnodes Computer Monitor APH 8190 User Manual
a d s Stereo Receiver AVR 144 User Manual
Aiphone Radio PGT 8 User Manual
Aiwa Stereo System AV S17 User Manual
Allied Telesis Network Card AT 2911LTX LC User Manual
Aluratek Network Card AVH100F User Manual
AOSafety Home Safety Product Eyewear Lens User Manual
Atmel Computer Hardware ATSTK94 User Manual
BB Electronics Network Card MESR9xx User Manual
BB Electronics Surge Protector 232SP9 User Manual