Addonics Technologies Computer Drive REDESP User Manual

User Guide  
Ruby eSATAp ExDrive  
(REDESP, REDESPU3)  
T E C H N O L O G I E S  
Installing your HD to the  
Ruby eSATAp ExDrive  
Step 1  
Separate the top from the bottom cover of  
the drive enclosure by loosening the screw.  
SATA Connector  
HD  
Step 2  
Align the SATA connector in the  
2.5” hard drive with the SATA  
connector on the PCB.  
Switch  
PCB  
Shock Absorbers  
Step 3  
Wrap the shock absorbers around  
the hard drive and PCB.  
Bottom of PCB  
Step 4  
Turn over the PCB and secure the hard  
drive to the PCB with the mounting  
screws that come with the kit.  
v3.1.11  
Technical Support  
If you need any assistance to get your unit functioning properly, please have your  
product information ready and contact Addonics Technical Support at:  
Hours: 8:30 am - 6:00 pm PST  
Phone: 408-453-6212  
 

3D Innovations Gas Grill C 150 User Manual
ACCO Brands Electric Heater H65 User Manual
Agilent Technologies Webcam 34970 80010 User Manual
Alpine CD Player CDA 7990 User Manual
Amana Microwave Oven RC17 User Manual
American Standard Outdoor Shower 1662602 User Manual
Ativa Speaker System DS 955 User Manual
Axis Communications Home Security System Q7401 User Manual
Behringer Headphones MA400 User Manual
Behringer Musical Instrument Amplifier BT108 User Manual