Advantech Stereo Amplifier SSPA SSPB User Manual

C-Band Hub-mount  
SSPA/ SSPB  
60W to 250W  
AWMA-3000C series  
Features  
Remote Monitor & Control  
High gain and linearity  
Output power up to 250W (see table A)  
Gain adjustment  
Output sample monitor port  
Temperature gain compensation  
Automatic over-temperature shutdown  
Automatic high reflected power shutdown  
Infinite VSWR protection  
Field replaceable power supply  
CE Marking  
Overview  
The AWMA-C series are the outdoor solid-state power amplifiers  
(SSPAs), operating in C-Band frequency range. The amplifier is an  
integrated unit, complete with power supply and cooling system.  
Intended for outdoor operation, the AWMA-3000C is weatherproof.  
Built-in microprocessor controller provides the capability for serial  
port interfaces (RS485, RS232) for remote monitoring and control.  
Table A  
Output  
RF Band  
Power  
(GHz)  
(W)  
Band  
CL  
CP  
CI  
4.400 - 5.000  
6.425 - 6.725  
6.725 - 7.025  
5.725 - 6.025  
5.850 - 6.425  
5.850 - 6.725  
60 200  
60 200  
60 200  
60 250  
60 250  
60 150  
Advantech’s SSPAs set the industry standard for linearity and  
operating efficiency. Built-in design features and assembly methods  
incorporated with efficient combining techniques result in the  
trouble-free operation of the amplifier.  
CR  
CS  
CX  
Application  
*Other frequency sub-bands are available. Please consult  
factory.  
The SSPAs are designed for C-Band satellite up-link applications.  
They are mounted outdoors, near the hub of an antenna. The  
AWMA-C series are available in output power from 20W to 1000W.  
For higher power Advantech provides phase-combined systems.  
Options  
Integrated Block Up Converter  
Additional harmonic filter  
Extreme temperature operation  
Redundant system  
Other SSPAs are available for operation at other satellite frequency  
bands. With all the features of the AWMA-C, Advantech also offers a  
built-in converter.  
Redundancy  
Accessories  
With the addition of the appropriate waveguide and switch kit, the  
AWMA-3000C amplifiers can be easily converted for the operation  
in 1:1 redundant configuration with full remote Monitor and Control  
capability of the redundant system via serial interface. A single  
Monitor and Control interface is required to manage redundant  
system.  
Redundancy Kit  
Mounting Frames  
Remote M&C panel (Ethernet port optional)  
 

Accusplit Heart Rate Monitor S3MAGXLBK User Manual
AEG Blender M 2600 User Manual
AEG Dishwasher 44080 I User Manual
Airpura Industries Air Cleaner 600 W User Manual
Alesis Electronic Keyboard DG8 User Manual
American Standard Indoor Furnishings 0456013 User Manual
Aspen Touch Solutions Computer Monitor ATM 173R User Manual
Audiovox Car Speaker SW 50 User Manual
Audiovox Speaker AVW100 User Manual
Behringer DJ Equipment B312A User Manual