Agilent Technologies Computer Drive e5052 90202 User Manual

Agilent E5052BU Option 018  
Hard Disk Drive Kit  
User’s Guide  
First Edition  
Manufacturing No. E5052-90202  
May 2007  
 
1
General Information  
This chapter describes the Hard Disk Drive Kit, contents of the kit, and required tools to  
install the Option 018 into the Agilent E5052B.  
3
 
General Information  
Option 018 Hard Disk Drive Kit  
Option 018 Hard Disk Drive Kit  
The purpose of this kit is to install the option 018 into the Agilent E5052B.  
Contents of the Agilent E5052BU Option 018 Hard Disk  
Drive Kit  
The kit includes the parts listed in Table 1-1. If anything is missing, contact the nearest  
Agilent Technologies office.  
Table 1-1  
Contents of the Agilent E5052BU Option 018 Hard Disk Drive Kit  
Description  
Qty.  
Upgrade Manual (This manual)  
HDD Assembly  
1
1
4
Chapter1  
 
2
Option Installation  
This chapter describes the procedure to install the option 018 into the Agilent E5052B.  
5
 
Option Installation  
Introduction  
Introduction  
This chapter describes the procedure to install Option 018 into the E5052B. The procedure  
consists of the following items.  
Installation Requirement  
Saving System calibration Data from Removable Hard Disk to USB Pen Drive  
Removing Removable Hard Disk  
Mounting Removable Hard Disk  
Initial Registration of E5052B  
Calibration of the Touch Screen  
Recalling System Calibration Data from USB Pen drive to Removable Hard Disk  
Procedure  
Installation Requirement  
5188-4426 Key for Hard Disk Carrier  
USB Pen Drive (Over 512MB)  
6
Chapter2  
 
Option Installation  
Procedure  
Saving System calibration Data from Removable Hard Disk to USB  
Pen Drive  
The following is a description of the procedures to save the system calibration data stored  
in the removable hard disk to a USB Pen drive.  
Step 1. Exit the measurement window.  
System > Service Menu > Administorator Menu > Exit E5052B > OK  
Step 2. Insert a USB Pen drive into the USB port in front panel.  
Step 3. Open D:\Recovery drive.  
Step 4. Click .D:\syscal from the explorer.  
Step 5. Select Edit - Copy from menu bar of the explorer.  
Step 6. Click the USB Pen drive of the explorer.  
Step 7. Select Edit - Paste from menu bar of the explorer.  
Step 8. Click .D:\limit from the explorer.  
Step 9. Select Edit - Copy from menu bar of the explorer.  
Step 10. Click the USB Pen drive of the explorer.  
Step 11. Select Edit - Paste from menu bar of the explorer.  
Step 12. Turn off the E5052B, and then remove the cord from the outlet before removing the  
Removable Hard Disk.  
Chapter 2  
7
 
Option Installation  
Procedure  
Removing Removable Hard Disk  
Follow the steps below to remove a removable hard disk.  
CAUTION  
Before removing a hard disk, you must turn off the unit’s power and then disconnect the  
power cord from the outlet.  
Step 1. Turn off the power.  
Step 2. Insert the key in the lock and turn anti-clockwise.  
Step 3. Open the screw in clockwise direction.  
Step 4. Press the button under direction.  
Step 5. Remove the hard disk.  
Mounting Removable Hard Disk  
Follow the steps below to mount a removable hard disk.  
Step 1. Insert the hard disk into the slot.  
Step 2. Turn the screw in anti-clockwise direction until it is locked.  
Step 3. Turn the key to the right until it is locked.  
Step 4. Remove the key.  
Step 5. Turn on the E5052B.  
8
Chapter2  
 
Option Installation  
Procedure  
Initial Registration of E5052B  
When you start up the E5052B at the first time, you need to perform the initial registration  
of the Windows XP operating system of the E5052B.  
NOTE  
NOTE  
You cannot use the front panel keys during the initial registration of the E5052B therefore  
connect the mouse and the keyboard before turning on the power.  
If you perform the following procedure incorrectly, a message asking you whether to return  
to the previous registration screen and perform the registration appears. In this case, follow  
the instruction to return to the previous registration screen.  
Step 1. Turns on the E5052B.  
Step 2. The Windows XP Professional Setup wizard appears. Click the Next > button (Figure 2-1).  
Figure 2-1  
Windows XP Professional Setup wizard  
e5071cse1073  
Chapter 2  
9
 
Option Installation  
Procedure  
Step 3. In the Windows XP Professional Setup dialog box, select the I accept this agreement box  
and click the Next >button (Figure 2-2).  
Figure 2-2  
Windows XP Professional Setup dialog box (1/2)  
e5071cse1074  
Step 4. In the next dialog box , input E5052 in the Name box. Then, click the Next> button (Figure  
2-3).  
Figure 2-3  
Windows XP Professional Setup dialog box (2/2)  
E5052  
e5052bse1033  
Step 5. After a while, the E5052B restart automatically. Then, the measurement display appears.  
10  
Chapter2  
 
Option Installation  
Procedure  
Calibration of the Touch Screen  
When you have replaced the HDD on an E5052B, you have to calibrate the touch screen.  
Follow the procedure described below to calibrate the touch screen.  
Step 1. Press  
.
Step 2. Press Service Menu.  
Step 3. Press Test Menu.  
Step 4. Press Adjust Touch Screen.  
The touch screen calibration screen (Figure 2-4) appears.  
Figure 2-4  
Touch Panel Calibration Screen  
Step 5. Touch the x mark on the upper left with your finger. The mark x appears also on the lower  
left, upper right, and lower right. Touch the x marks in that order with your finger.  
Touching the four locations described above with your finger automatically concludes the  
touch screen calibration.  
NOTE  
With no operation on the touch screen calibration screen for a preset time, it automatically  
closes and the previous measurement screen reappears.  
Chapter 2  
11  
 
Option Installation  
Procedure  
Recalling System Calibration Data from USB Pen drive to Removable  
Hard Disk  
The following is a description of the procedures to copy the system calibration data stored  
in the USB Pen drive to the removable hard disk.  
Step 1. Exit the measurement window.  
System > Service Menu > Administorator Menu > Exit E5052B > OK  
Step 2. Insert a USB pen drive in to the USB port in front panel.  
Step 3. Open D:\Recovery drive.  
Step 4. Click syscal folder in the USB Pen drive from the explorer.  
Step 5. Select Edit - Copy from menu bar of the explorer.  
Step 6. Click the D:\ of the explorer.  
Step 7. Select Edit - Paste from menu bar of the explorer.  
Step 8. Click limit folder in the USB Pen drive from the explorer.  
Step 9. Select Edit - Copy from menu bar of the explorer.  
Step 10. Click the D:\ of the explorer.  
Step 11. Select Edit - Paste from menu bar of the explorer.  
Step 12. Restart E5052B  
12  
Chapter2  
 
REGIONAL SALES AND SUPPORT OFFICES  
For more information about Agilent Technologies test and measurement products, applications, services, and  
of the following centers and ask for a test and measurement sales representative.  
21/01/2004  
United States:  
Australia/New Zealand:  
Test and Measurement Call Center  
(tel) 1 800 452-4844  
(fax) 1 888 900-8921  
(tel) (61 3) 9210-5555 (Australia)  
(fax) (61 3) 9210-5899  
(tel) (64 4) 939-0636 (New Zealand)  
(fax) (64 4) 972-5364  
Canada:  
Test and Measurement Call Center  
(tel) 1 877 894-4414  
(fax) 1 888 900-8921  
Asia Pacific:  
(tel) (65) 6375-8100  
(fax) (65) 6836-0252  
China:  
(tel) 800 810-0189  
(fax) 800 820-2816  
Europe:  
(tel) (31 20) 547-2323  
(fax) (31 20) 547-2390  
Japan:  
Call Center  
(tel) 0120 421-345  
(tel) (81) 426 56-7832  
(fax) (81) 426 56-7840  
Korea:  
(tel) (82 2) 2004-5004  
(fax) (82 2) 2004-5115  
Latin America:  
(tel) (305) 269-7500  
(fax) (305) 269-7599  
Taiwan:  
(tel) 0800 047 866  
(fax) 0800 286 331  
 

3Com Network Card 3C17715 User Manual
Aastra Telecom Telephone Telephone 9110 User Manual
Acer Computer Monitor X221W User Manual
AIPTEK Camcorder HD DV Camcorder User Manual
Aluratek Portable Speaker ABS03F User Manual
Alvarez Car Speaker SA1232z User Manual
American Dish Service Dishwasher 5 CD LF RF User Manual
Audiovox Remote Starter PRO 2000S User Manual
Avocent Network Card CCM4850 User Manual
Behringer Musical Instrument 02222FX User Manual