Aiphone Baby Monitor GW LE8 User Manual

Special  
Order  
Products  
GW-LE8  
Selective Call Audio Module for Open Voice Systems  
Use with:  
C-ML/A, LEM-1DL/C, LEF, LAF-C, or LDF Masters  
- INSTRUCTIONS -  
The GW-LE8 is an audio module, used with other components to make up a selective calling audio  
door station. Panels from two to eight stations can be created. The entrance panel can selectively call  
and communicate with open voice inside master stations. Use any of the above listed master stations.  
8 Call Entrance Station  
*MODULAR ENTRANCE STATIONS  
List of components for each entrance panel:  
2 Call Panel  
3 Call Panel  
4 Call Panel  
1
1
1
1
GW-LE8  
GW-DP  
GW-2P  
GW-2  
1
1
1
1
GW-LE8  
GW-DP  
GW-3P  
GW-2  
1
1
1
1
GW-LE8  
GW-DP  
GW-4P  
GW-2  
GW-LE8  
w/ GW-DP  
5 Call Panel  
6 Call Panel  
7 Call Panel  
1
1
1
1
1
GW-LE8  
GW-DP  
GW-1P  
GW-4P  
GW-3  
1
1
1
1
1
GW-LE8  
GW-DP  
GW-2P  
GW-4P  
GW-3  
1
1
1
1
1
GW-LE8  
GW-DP  
GW-3P  
GW-4P  
GW-3  
GW-3  
GW-4P  
(x2)  
8 Call Panel  
1
1
2
1
GW-LE8  
GW-DP  
GW-4P  
GW-3  
COMPONENT MODELS AND DESCRIPTIONS  
Model  
Description  
GW-LE8  
GW-DP  
GW-1P  
GW-2P  
GW-3P  
GW-4P  
GW-2  
Audio Module  
Audio Module Front Panel  
1 Button Panel  
2 Button Panel  
3 Button Panel  
4 Button Panel  
2 Panel Back Box  
3 Panel Back Box  
GW-LE8 Terminal Definitions:  
D+  
D-  
Common communication  
Negative, common call signal  
Yel  
Blu  
Common Call signal  
(8 wires) Selective Call-in and  
GW-3  
communication wires (1 per button)  
SEMI-FLUSH AND SURFACE MOUNTING BOXES:  
Model Description  
GW-002H Semi-flush Mt. Hood for GW-2  
GW-002HB Surface Mt. Hood for GW-2  
GW-003H Semi-flush Mt. Hood for GW-3  
GW-003HB Surface Mt. Hood for GW-3  
Pg. 1  
 
WIRING DIAGRAM:  
GW-LE8 WITH GW-4P, USING LEM-1DL/C MASTER STATIONS  
GW-LE8  
LEM-1DL/C  
LEM-1DL/C  
LEM-1DL/C  
LEM-1DL/C  
E
-
+
D+  
D-  
E
-
+
R
1
E
-
+
E
-
+
R
~
~
~
~
~
~
~
~
GW-4P  
1
Yel  
Blu  
Blu  
Blu  
Install jumper  
between D+/D-  
PT-1210N  
PT-1210N  
PT-1210N  
PT-1210N  
R
R
2
3
4
1
1
Blu  
Blu  
Blu  
Blu  
Blu  
1
EL  
EL  
EL  
EL  
EL  
EL  
EL  
EL  
~
~
NOTES:  
AC Power  
1. Only components of the entrance panel that include wire  
connections are shown here.  
Door Strike  
2. For complete wiring information, please see the LEM-1DL/C  
instructions.  
WIRING DIAGRAM:  
GW-LE8 WITH GW-4P & GW-2P, USING LEF-5 MASTER STATIONS  
LEF-5 #1  
LEF-5 #2  
LEF-5 #3  
LEF-5 #4  
LEF-5 #5  
LEF-5 #6  
GW-LE8  
Remove D+/D-  
jumper on all  
masters.  
E
-
+
R
1
E
-
+
R
E
-
+
R
E
-
+
R
E
-
+
R
E
-
+
R
D+  
D-  
-
+
GW-4P  
Yel  
Blu  
Blu  
Blu  
Blu  
PS-12C  
1
2
3
4
1
1
1
GW-2P  
1
1
Blu  
2
1
Blu  
Blu  
Blu  
K1  
L
K1  
L
K1  
L
K1  
L
K1  
L
K1  
L
Yel  
Blk  
RY-PA  
~
~
AC Power  
Door Strike  
NOTES:  
1. In this example, the door station rings in on station #1 of each master station.  
It can be wired to any unused station number.  
2. Only components of the entrance panel that include wire connections are shown here.  
3. For complete wiring information, please see the standard LEF instructions.  
If additional master stations are to be installed in each office/suite, wire them per the standard instructions.  
Pg. 3  
 
Pg. 4  
 
MOUNTING:  
1. Cut appropriate sized mounting hole into wall.  
2. Assemble and mount entrance panel  
GW-2  
GW-3  
1. Open a hole in the back box to pass cable through.  
2. Mount the GW-LE8 to the GW-DP using the supplied screws.  
3. Mount the components to the GW-2 or GW-3 frame.  
4. Mount the frame to the back box.  
4-1/2"  
4-1/2"  
5. Replace the two mounting screw covers.  
8-1/8"  
11-3/4"  
Standard flush mount installation:  
Flush mount installation with weather hood:  
GW-3  
(Frame)  
GW-3  
(Frame)  
GW-003H  
(Weather hood)  
GW-DP +  
GW-LE8  
(GW-LE8 mounts to GW-DP  
with supplied screws)  
GW-DP +  
GW-LE8  
(GW-LE8 mounts to GW-DP  
with supplied screws)  
GW-3  
(Box)  
GW-3  
(Box)  
GW-4P  
(Call switch panel)  
GW-4P  
(Call switch panel)  
Surface mount installation with weather hood:  
Filling in resident names:  
GW-3  
(Frame)  
GW-003HB  
(Weather hood)  
1. Remove protective cover using opener.  
(Opener included with GW-2 and GW-3 frames)  
Protective Cover  
GW-DP +  
GW-LE8  
(GW-LE8 mounts to GW-DP  
with supplied screws)  
Opener  
GW-4P  
(Call switch panel)  
Pg. 5  
 
OPERATION:  
1. The entry station has multiple call buttons with an associated directory card. Press the button of the  
person you wish to call.  
2. The master station(s) will ring an electronic call tone as long as the call button on the entrance station  
is being held. (A chime will be heard when using the C-ML/A room stations.)  
3. With CM-L/A and LEM-1DL/C Master Stations: Press TALK button to answer the call.  
With LEF Master Stations: Select the station button with the lit LED to answer. If the LED has gone out  
(stays on for approx. 20 seconds), press the selector button assigned to the entry station.  
4. At the inside station, press the TALK button to talk, and release to listen. The person at the entrance  
station speaks hands free.  
5. When finished with the call, press the OFF button on the master station.  
6. NOTE: If the "Occupied" lamp is on, the system is in use. Wait until the LED goes out, or determine if  
a master station has been left on unintentionally.  
SPECIFICATIONS:  
Power Source:  
Provided from master station.  
C-ML/A: 1 SKK-620 or 4 "C" batteries per master.  
LEM-1DL/C: 1 PT-1210N per master.  
LEF: 1 PS-12C per system.  
Impedance:  
Communication:  
Calling:  
20 ohms  
Hands free at entry station. Push-to-talk at master station.  
C-ML/A: 4-Stroke chime  
LEM-1DL/C: Momentary call tone  
LEF: Momentary call tone and LED, remaining lit for approx. 20 seconds  
C-ML/A: 2 conductors homerun per station to entrance panel.  
LEM-1DL/C: 2 conductors homerun per station to entrance panel.  
LEF: 4 common (E, R, +, -) plus 1 individual per sub, looped; or 5 conductors homerun  
to each master. Shielded cable is recommended.  
Use Aiphone #822202 (2 conductor) or 822212 (12 conductor) for max. 8 station wiring.  
Wiring:  
Door Release Wiring: 2 conductors looped through stations to strike and strike power supply.  
Wiring Distance:  
C-ML/A: 245' with 22AWG; 590' with 18AWG.  
LEF/LEM: 650' with 22AWG; 1,600' with 18AWG.  
NOTE:  
Only information concerning the GW-LE8 is shown here.  
For complete wiring information, please see the appropriate system instructions.  
TOLL FREE TECHNICAL SUPPORT:  
Aiphone Communication Systems  
1700 130th Ave. N.E.  
Bellevue, WA 98005  
(425) 455-0510  
(800) 692-0200  
TOLL FREE FAX LINE:  
Pg. 6  
(800) 832-3765  
GW-LE8 Instr.  
1001bkjd  
FAX (425) 455-0071  
 

Abocom Switch UH400C User Manual
Acer Projector K11 User Manual
ADC Network Card 105968AE User Manual
Advanced Wireless Solutions Two Way Radio EnGenius User Manual
Aleratec Computer Accessories 260203 User Manual
Allied Telesis Network Card AT iMG616BD User Manual
Alpine Car Stereo System DVA 7996 User Manual
A T International Cordless Telephone TL32100 User Manual
Barco Cell Phone Accessories 3 User Manual
Behringer Car Speaker VP1220 User Manual