Aiphone Caller ID Box TC 10MD User Manual

n
Master Station with Selective Door Release  
TC-10MD 10-Call Master  
TC-20MD 20-Call Master  
- SUPPLEMENT TO TC-M INSTRUCTIONS -  
The TC-MD Intercom and Selective Door Control System is designed for communication between a central master  
station and remote door stations. The TC-MD adds door release to the standard TC-M system. All information  
regarding installation other than the external control functions is included in the TC-M instructions. In addition to  
communication to remote locations, the Master Station can selectively release the corresponding door strike or  
maglock.  
WIRING DIAGRAM: SYSTEM USED FOR SELECTIVE DOOR RELEASE  
TC-10MD  
TB-AD1  
For Door #10  
IE/IF Door  
Station  
TB-AD1  
For Door #9  
1
2
3
~
9
1
2
IE/IF Door  
Station  
1
2
1
2
1
2
10  
E
TC-20MD  
N
T
R
+
-
N
T
R
+
-
T
R
12+  
12-  
M
Door Release button  
Located below  
C
TRANSFER button.  
Relays are activated  
when the door  
release button is  
being pressed while  
a station button is  
selected.  
Momentary Closure for Station #1  
RY-PA  
#1  
1
~
9
BLK  
YEL  
Momentary Closure for Station #9  
Momentary Closure for Station #10  
RY-PA  
#9  
BLK  
YEL  
BLK  
10  
L
RY-PA  
#10  
YEL  
Common for each closure  
PS-1820UL  
To convert RY-PA to N/C (normally  
closed) contact: Move one yellow wire  
from "NO" to "NC". (Internal  
modification, soldering required.)  
+
-
AC/  
DC  
Input  
x
x
AC Power  
for Door  
Releases  
Individual Components for System:  
TC-MD TERMINAL DEFINITIONS:  
TC-nMD  
RY-PA  
Master station with selective contact output capability (10, 20)  
Relay for selective output (1 per station requiring external contact)  
18V DC, 2A Power Supply  
1 Audio Door Adaptor  
10 Audio Door Adaptor  
+
-
1~10  
E
M,C  
T
Power input (18V DC or 16V AC)  
Negative  
Station number  
Common communication  
Master-to-Master communication  
Transmit to door station  
Receive from door station  
Output to call extension speaker  
PS-1820UL  
TB-AD1  
TB-AD10  
TB-ADM10  
IMPORTANT:  
1. RY-PA must be used for each selective contact to  
isolate AC voltage from the intercom circuit.  
2. Extra contact connections and L are on the  
external terminal block.  
10 Video Door Adaptor  
R
S, S  
SEPARATE TERMINAL BLOCK LOCATED INSIDE MASTER:  
1~10 (20) Selective negative for each channel  
L
Common Positive output for selective closure  
Pg. 1  
 

Acer Computer Monitor P193 User Manual
Acnodes Computer Monitor PMW6220 User Manual
ADS Technologies Switch USBH 2004 User Manual
ADTRAN Power Supply 6 Amp Power User Manual
Air King Vacuum Cleaner CVEK3000 User Manual
Air King Ventilation Hood ARA36GL User Manual
Alpine Stereo Amplifier MRA F350 User Manual
ATN Inc Microscope Magnifier 10x65Z User Manual
Avital Automobile Alarm MAXX2 User Manual
Axis Communications Security Camera P3343 User Manual