Vandal Resistant Black & White Video Door Station
With Built in Proximity Card Reader
- INSTRUCTIONS-
The MK-DVF-HID is an MK-series Black & White video door station and an HID ProxPoint Plus
Card Reader, built onto the same stainless steel faceplate. The card reader provides electronic
access to a building through a separate Access Control System, which is not supplied by
Aiphone.
INSTALLATION:
1. For flush mounting, cut hole in wall and use supplied back box.
Box dimensions are 4-½”W x 10-⅜”H x 1-¾”D.
2. For surface mounting, use the SBX-DVF-P surface mount box.
This box can mount to a standard 1- gang box or to any flat surface.
MK-DVF-HID
(front view)
MK-DVF-HID
(back view)
11-⅝”
5-¾”
Connecting the Reader to the Host:
Connect the reader to the host according to the
wiring table below and the host installation guide.
Wiegand
Wire Color
+ DC (5-16V) Red
Ground
Data0
Data1
Black
Green
White
20" pigtail cable
Shield Ground Drain
Green LED
Red LED
Beeper
Orange
Brown
Yellow
Blue
Hold
Card Present Violet
Pg. 1
|