Aiphone Intercom System IS Series User Manual

834171 C 0811YZ  
IS SERIES  
Commercial & Security Video Intercom system  
Local System  
SETTING MANUAL  
Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate  
“OPERATION MANUAL” carefully before setting and using this system.  
*
Refer to the provided “INSTALLATION MANUAL” for complete information regarding this system.  
IMPORTANT  
Please read and understand the system setting procedures before beginning the setup process.  
Please note that images and illustrations depicted in this manual may differ from the actual ones.  
 
ABOUT THIS MANUAL  
The IS system provides various manuals to meet various system planning and work processes. Use the manuals necessary for your  
system.  
Manual congurations  
The following manuals are provided for a local system. Read all the manuals for installing, setting up, and using a local system, or  
provide the manuals to the persons working with the system.  
* The INSTALLATION MANUAL includes the contents for a standard (IP) system.  
INSTALLATION MANUAL (A booklet included with the central control unit)  
Used for installing and connecting control units, stations and power supply unit. (For an installer or serviceman)  
SETTING MANUAL (This manual on the CD-ROM included with the central control unit)  
This manual describes how to make the system settings and system maintenance. (For an installer or serviceman)  
OPERATION MANUAL (An electronic manual on the CD-ROM included with the central control unit)  
Information for using the system for calling, communicating, paging, monitoring, etc. (For users of the system)  
PURPOSE OF THE SYSTEM SETTINGS  
After the installation and connections of all the components are completed, congure the system settings based on how your system  
is planned to be used. System settings must be completed before the system will operate.  
CAUTION:  
Make the settings correctly. If the settings are not made correctly, the system will not function as planned.  
NOTE:  
This manual is for setting a local system. To make settings for a standard (IP) system using an IP network, read  
the SETTING MANUAL for the standard (IP) system.  
3
 
SETTING LIST  
The following is the list of system settings you can make via the web browser. The titles or items in shaded cells are required.  
NOTE:  
The following list is a brief overview of the setting items available in the system settings on a PC. The descriptions, and the style and order of  
descriptions do not necessarily equate with the actual displays.  
Title  
(On the login  
window)  
System  
conguration  
Sub title  
Item  
(Language)  
Sub item  
Setting range  
English/French/German/Spanish/Dutch/ English  
Italian/Japanese  
Local system/Standard system  
(IP system)  
Default  
-
-
-
-
-
Local system  
Network setting -  
IP version  
(Select the network  
setting method.)  
-
-
IPv4  
IPv4  
DHCP  
DHCP/Static IP Address  
Static IP Address  
Static IP Address (required when 0 – 255 (for each eld)  
[Static IP Address] is selected)  
192.168.0.30  
255.255.255.0  
Subnet Mask (required when  
[Static IP Address] is selected)  
0 – 255 (for each eld)  
Default Gateway  
Primary DNS Server  
Secondary DNS Server  
-
-
0 – 255 (for each eld)  
0 – 255 (for each eld)  
0 – 255 (for each eld)  
(Unmodiable)  
Up to 24 alphanumeric characters  
(except accent marks, umlaut marks,  
etc.)  
-
-
-
MAC address  
Unit name  
(Unmodiable)  
-
Web port  
-
(Unmodiable)  
(Unmodiable)  
Administrator  
setting  
-
New administrator ID -  
Up to 16 alphanumeric characters  
Up to 16 alphanumeric characters  
Up to 16 alphanumeric characters  
Up to 16 alphanumeric characters  
-
Current Password  
New Password  
-
-
-
- (aiphone)  
-
-
New Password  
(Re-type)  
System setting Area registration  
Area name  
-
-
-
Up to 24 alphanumeric characters (for  
up to 99 areas)  
Up to 24 alphanumeric characters (for  
up to 99 zones)  
1 (for Area  
number 01)  
-
Zone registration Zone name  
Control units  
composition  
Room sub control  
unit 1 to 4,  
Connected/Not connected  
Not connected  
Add-on control unit 1  
to 2  
Registering  
stations  
Area (stations only)  
Station number  
(stations only)  
-
-
(Area) 01 to 99  
001 to 999  
0001 to 9999  
00001 to 99999  
(Area) 01  
-
Station name  
(for stations)  
Station name  
-
-
Up to 24 alphanumeric characters  
-
-
Up to 24 alphanumeric characters  
(for PA output)  
(Required when  
an external unit is  
connected to the  
corresponding PA  
output terminals)  
Station type  
(sub stations only)  
-
(Select from the registered ones.)  
(Depends on  
the control  
unit.)  
4
 
Title  
Sub title  
Item  
Sub item  
Call priority  
Setting range  
Normal/Priority/Urgent  
Default  
Normal  
System setting Advanced station Video door  
settings  
station/Audio  
door station/  
Room sub  
station  
Called stations  
(Set up to 20 master stations from the  
registered ones.)  
Normally open (NO)  
/Normally closed (NC)  
-
Contact type  
Normally open  
(NO)  
Call priority/Answering Answering the page  
Normal  
the page  
/Call (Normal/Priority/Urgent)  
Transmit volume boost ON/OFF  
OFF  
at PTT  
(ON: approx. +6dB up)  
Camera zoom image  
preset (video door  
stations only)  
0 (wide)/1/2/3/4/5/6/7/8/9 (zoom)  
5 (Center)  
Call acknowledge tone ON/OFF  
on/off  
ON  
Backlight adjustment  
(video door stations  
only)  
Exposure +/Exposure -  
Exposure +  
Speaker  
Built-in speaker  
Built-in  
(room sub stations only) /External speaker  
Stations to be scan monitored (Select up to 20 sub stations from the  
registered ones.)  
Master station function: ON/OFF  
speaker  
-
Master station  
ON  
paging, chime, monitor,  
door release, and  
remote site call  
Central  
control unit  
(Contact input)  
Contact type  
S1 to S4  
Normally open (NO)  
/Normally closed (NC)  
S1  
Normally open  
(NO)  
Trigger condition  
Sound source  
None/Broadcast chime/Stop chime  
Internal sound source (Select a  
None  
-
(Only when "Broadcast sound le or sequence name from the  
chime" is selected at  
"Trigger condition")  
registered ones in the list.)  
/External sound source (Select either  
External sound source 1 or 2.)  
Chime priority  
Normal/Priority/Urgent  
Normal  
(Only when "Broadcast  
chime" is selected for  
"Trigger condition")  
Zone name  
(Select from the registered ones.)  
-
(Only when "Broadcast  
chime" is selected at  
"Trigger condition")  
(Contact output terminal) L1 to L8  
L1  
Contact type  
Normally open (NO)  
/Normally closed (NC)  
Normally open  
(NO)  
Trigger condition  
None/Calling notice/Door release  
/External sound source/PA output  
None  
Calling notice  
Normal: OFF/ON  
Priority: OFF/ON  
Urgent: OFF/ON  
Normal: OFF  
Priority: OFF  
Urgent: OFF  
(Only when "Calling  
notice" is selected at  
"Trigger condition")  
Door release  
(Select from the sub stations registered  
and set for the central control unit.)  
-
(Only when "Door  
release" is selected at  
"Trigger condition")  
External sound source External sound source 1  
-
(Only when "External  
sound source" is  
selected at "Trigger  
condition")  
/External sound source 2  
PA output  
PA output 1 to 4  
-
(Only when "PA output"  
is selected at "Trigger  
condition")  
5
 
Title  
Sub title  
Item  
Sub item  
Setting range  
Default  
System setting Advanced station Room sub  
(Contact output  
terminal)  
Contact type  
L1 to L4  
L1  
settings  
control unit/  
Add-on  
Normally open (NO)/Normally closed (NC) Normally open  
(NO)  
control unit  
Trigger condition  
None/Calling notice/Door release/PA  
output  
None  
Calling notice  
Normal: OFF/ON  
Priority: OFF/ON  
Urgent: OFF/ON  
Normal: OFF  
Priority: OFF  
Urgent: OFF  
(Only when "Calling  
notice" is selected at  
"Trigger condition")  
Door release  
(Select from the sub stations registered  
and set for each control unit.)  
-
(Only when "Door  
release" is selected at  
"Trigger condition")  
PA output  
PA output 1 to 4  
-
(Only when "PA output"  
is selected at "Trigger  
condition")  
Zone setting  
Zone number  
Stations  
PA output  
-
-
-
-
(Select from the registered ones.)  
(Select from the list.)  
(Select from the list.)  
-
-
-
-
Chime setting Registering sound (Sound le)  
SF1 to SF15 (3MB in total, 2MB/le)  
source  
Registering sound Sound number  
-
-
SS1 to SS20  
Up to 24 alphanumeric characters  
SS1  
-
sequences  
Sound sequence  
name  
Step  
-
1 to 10  
1
Sound source  
Sound le  
Repeat times  
(Select from the registered ones.)  
1 to 10  
-
1
Registering daily Schedule number  
-
-
-
DS1 to DS10  
Up to 24 alphanumeric characters  
Hour: 0 to 23  
DS1  
-
-
chime schedule  
Schedule name  
Chime time  
Minute: 0 to 59  
Second: 0 to 59  
Sound source  
-
Sound le (Select from the registered  
ones.)  
-
/Sound sequence (Select from the  
registered ones.)  
/External sound source (1 or 2)  
Zone number  
Chime priority  
Weekly schedule  
-
-
(Select from the registered ones.)  
Normal/Priority/Urgent  
Every week/Every other week  
From the current day to 1 year ahead  
From the start day to 1 year ahead  
-
Normal  
Every week  
-
-
Chime schedule  
setting  
(Repeat setting)  
Schedule start date  
Schedule end date  
(Chime schedule)  
None/DS1 to DS10 (for each day of the None  
week)  
Individual schedule (Date)  
Daily chime schedule  
From the current day to 1 year ahead  
(Select from the registered ones.)  
Hour: 0 to 23  
-
None  
-
Chime time  
Minute: 0 to 59  
Second: 0 to 59  
Sound source  
Sound le (Select from the registered  
ones.)  
-
/Sound sequence (Select from the  
registered ones.)  
/External sound source (1 or 2)  
Zone number  
Chime priority  
-
(Select from the registered ones.)  
Normal/Priority/Urgent  
(Download the chime (and transfer)  
schedule data in CSV format.)  
-
Normal  
-
Schedule download  
6
 
Title  
Sub title  
Item  
Sub item  
Setting range  
Default  
DT1  
-
-
Transfer setting Registering daily Schedule number  
-
-
-
DT1/DT2  
transfer schedule  
Schedule name  
Call transfer time  
Up to 24 alphanumeric characters  
Hour: 0 to 23  
Minute: 0 to 59  
(Set to the Start time and End time  
individually.)  
Transfer schedule Weekly schedule  
setting  
(Repeat setting)  
Every week/Every other week  
From the current day to 1 year ahead  
From the start day to 1 year ahead  
None/DT1/DT2 (for each day of the  
week)  
Every week  
-
-
Schedule start date  
Schedule end date  
(Transfer schedule)  
None  
Individual schedule (Date)  
From the current day to 1 year ahead  
(Select from the registered ones.)  
Hour: 0 to 23  
-
Daily transfer schedule  
Call transfer time  
None  
-
Minute: 0 to 59  
(Set to the Start time and End time  
individually.)  
Timer setting  
-
Call  
Normal/Priority/Urgent  
10 to 600 (sec.), 0 (Unlimited)  
Normal: 30 (sec.)  
Priority: 90 (sec.)  
Urgent: 0  
(Unlimited)  
Communication  
In Local (local system only)  
30 to 600 (sec.)  
60 (sec.)  
Paging  
Monitor  
Scan monitor:  
Switching  
-
-
-
30 to 600 (sec.)  
10 to 600 (sec.)  
5 to 60 (sec.)  
60 (sec.)  
60 (sec.)  
5 (sec.)  
Contact output  
External sound source 1  
External sound source 2  
-
10 to 300 (sec.)  
10 to 300 (sec.)  
0 to 300 (sec.), (0: Released while  
holding the Door release button  
pressed.)  
30 (sec.)  
30 (sec.)  
10 (sec.)  
Door release  
Time and date  
setting  
-
Set current time  
Manual setting  
Year: 2009 to 2099  
Month: 1 to 12  
Day: 1 to 31  
(Internal time  
of the central  
control unit)  
Hour: 0 to 23  
Minute: 0 to 59  
Second: 0 to 59  
Synchronized with PC  
-
-
NTP  
Synchronized with NTP server ON/OFF  
OFF  
-
123  
0
NTP server*1  
IP address or domain name  
1 to 65535  
-12 to +13 (h)  
NTP port number*1  
(UTC time zone*1)  
Hour difference*1  
(UTC time zone*1)  
Minute difference*1  
Synchronize interval*1  
-45/-30/0/+30/+45 (m)  
0
1 to 240 (h)  
24 (h)  
Daylight savings time -  
ON/OFF  
OFF  
JAN  
1st  
Sunday  
-
-
JAN  
1st  
Sunday  
-
Starts*2 Month  
JAN to DEC (M)  
1st to 4th (W)/The last  
Sunday to Saturday  
0 to 23 (h)  
Day  
(Week)  
(Day)  
(Hour)  
(Minute)  
Hour  
0 to 59 (m)  
Ends*2 Month  
Day  
JAN to DEC (M)  
1st to 4th (W)/The last  
Sunday to Saturday  
0 to 23 (h)  
0 to 59 (m)  
0 to 12 (h)  
(Week)  
(Day)  
(Hour)  
(Minute)  
Hour  
-
Hour difference*2  
1
0
-
Minute difference*2  
-
0/30/45 (m)  
Setting le  
Downloading  
setting data  
-
-
-
Uploading setting  
data  
-
-
-
*1: Available only when [Synchronized with NTP server] is set to ON.  
*2: Available only when [Daylight savings time] is set to ON.  
7
 
STARTING UP THE SYSTEM  
Before making the system settings, conrm that a PC is connected to the central control unit (IS-CCU). The system settings are made  
on the PC by accessing the web browser for the settings incorporated with the central control unit (IS-CCU).  
System requirements for PC  
Your PC and operating environment must meet the following system requirements to make the settings.  
Network  
10BASE-T Ethernet, 100BASE-TX Ethernet  
Web browser  
Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)  
Starting up the system  
Connect a PC to the central control unit.  
[When connecting a PC to the central control unit  
directly]  
1
[When connecting a PC to the central control unit  
via a router]  
PC  
RJ45  
CAT5e/6 (Crossover cable)  
RJ45  
100m (330')  
100m (330')  
CAT5e/6  
(Straight-through cable)  
10BASE-T/100BASE-TX  
10BASE-T  
/100BASE-TX  
NOTES:  
RJ45  
RJ45  
Select this connection method when using a static IP address.  
Router  
When connecting a PC to the central control unit directly, use  
an Ethernet crossover cable.  
100m (330')  
CAT5e/6  
(Straight-through cable)  
The IP address of central control unit is set to (192.168.0.30)  
as default. Change the IP address of your PC if needed.  
10BASE-T  
/100BASE-TX  
RJ45  
PC  
NOTES:  
Select this connection method when you will acquire an IP  
address automatically by DHCP.  
Do not select this connection method if your router does not  
have a DHCP server function.  
Be sure to connect the CAT5e/6 cable to the LAN ports of both  
units.  
8
 
Press down the "I" side of POWER switch to turn on  
all the control units in the system.  
2
Setting the system conguration  
[System conguration]  
After logging in to the system, the [System conguration]  
window appears.  
POWER switch  
Press down "I" side to turn on the  
unit.  
First of all, make the setting on this window before starting the  
system settings.  
Press down "O" side to turn off the  
unit.  
Select your system between “Local system” and  
“Standard system (IP system)”.  
1
Temporarily stored  
Click  
to save the setting result  
2
3
temporarily. (P. 10)  
*
Conrm that the following LEDs  
operate as shown below.  
Start the system settings by selecting a setting title in  
the table of contents on the left side of the window.  
Lights up.  
Blinks  
Go to the next page.  
(When the system settings have  
nished correctly, this LED turns from  
blinking (initializing) to lighting.)  
Start up the PC, and then open the browser window.  
3
4
Enter the static IP address (https://192.168.0.30/)  
or the IP address assigned by DHCP to access the  
web browser for settings.  
*
If you do not know your IP address assigned by DHCP,  
run “IS_IPSEARCH.exe” from the supplied CD-ROM,  
and then search for it.  
The login window of the web browser is displayed.  
Log in to the system by setting the following items.  
5
Select language  
Select the language for displaying contents on the  
setting windows.  
ID  
Enter “aiphone”.  
Password  
Enter “aiphone”.  
Login  
Login  
Click  
to display the setting window.  
*
When you log in for the rst time, the [Registration]  
window appears. Register your system as needed when  
the IS-CCU is connected to the IP network.  
NOTE:  
Be sure not to log in to the system more than once at the same  
time by opening multiple browser windows on the PC.  
9
 
MAKING THE SYSTEM SETTINGS  
The basic setting procedure  
When you have logged in to the system, the setting window appears. You can make the settings on this window.  
*
*
Make sure to refer to the on-screen instructions and comments displayed on each window when you make the settings.  
Depending on the PC and its OS or environment, the display may differ.  
<Setting window example>  
Setting contents display area  
The setting items of the selected setting title and their  
details are displayed here.  
Temporarily stored  
Table of contents  
Instructions area  
The instructions for settings are  
displayed here.  
Click this to save the current setting results  
temporarily.  
The setting titles are listed here.  
Click the title on which you want  
to make the settings to display the  
corresponding setting window.  
* This temporary storing will not update the  
system with the new setting results. To update  
the system, click the title “Updating the system”  
and follow the necessary procedure.  
The setting procedure  
Click a title in the table of contents on which you wish to make the settings.  
The setting window of the title is displayed.  
1
Make the settings on the setting items individually.  
2
3
Temporarily stored  
When you have nished making the settings on the current window, click  
results temporarily.  
to save the setting  
*
If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser  
menu. (If you change the current window to another without storing the setting results temporarily, a pop-up window appears  
asking if you want to store the results temporarily or not.)  
Repeat step 1 to 3 to make the settings on the other titles.  
To log out of the system, click [Logout] in the table of contents.  
4
*
10  
 
The following shows the setting procedure for the items of each title.  
Refer to “SETTING LIST” (P. 4-7) for details about the settings. Make the settings by also referring to the on-screen instructions.  
Making network settings [Network setting]  
Setting the administrator ID and password  
[Administrator setting]  
Make the settings for network according to your  
requirements.  
We recommend that you change the administrator ID and  
password from default to unique ones for security purposes.  
Click Network setting in the table of contents.  
1
*
“aiphone” is preset as the default for both ID and password.  
Click Administrator setting in the table of contents.  
1
Make the settings on the following items displayed in  
the setting window.  
2
Make the settings on the following items displayed in  
the setting window.  
Selecting the network setting method  
Set a (static) IP address to this unit. Select the method for  
acquiring a (static) IP address between [DHCP] and [Static  
IP Address].  
2
[New administrator ID]:  
Enter the new ID.  
[DHCP]:  
[Current Password]:  
Check this when you will acquire an IP address with  
DHCP.  
Enter the current password.  
*
A DHCP server (or a router) is required to acquire  
an IP address with DHCP. A router may not have  
the setup function depending on some models. For  
information about setting a router, see the instruction  
manual for the router.  
[New Password]:  
Enter a new password.  
[New Password (Re-type)]:  
Enter the new password again.  
[Static IP Address]:  
Temporarily stored  
Click  
to save the current setting  
Check this when you do not use a DHCP server (or  
a router) or connect the PC to the central control unit  
directly, and then enter the static IP address, subnet  
mask, etc.  
3
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
*
It is required to enter the static IP address and  
subnet mask.  
NOTE:  
[Unit name]:  
The system administrator must keep the ID and password without  
fail. If you forget the ID and password, you must initialize the unit,  
thus all the setting contents return to default.  
Enter a name for this unit. (This name will not be used  
when operating the system.)  
NOTE:  
The items that cannot be changed or selected are grayed out.  
Temporarily stored  
Click  
to save the current setting  
3
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
11  
 
Registering areas  
[System setting – Area registration]  
Registering control units [System setting  
– Control units composition]  
Required  
Register all the control units connected to the central control  
unit.  
Register areas for separating stations in the system. The  
number to which a name is entered is registered as an area  
number. Up to 99 areas can be registered.  
Click Control units composition in the table of  
1
Click Area registration in the table of contents.  
contents.  
1
Enter an area name in the cell for the area number 01.  
Click to check the radio button under "Connected" for  
the unit you will register.  
2
2
*
The gures under "Number" in the tables means the area  
numbers.  
Enter area names in the cells for other numbers to  
register more areas.  
3
4
Temporarily stored  
Click  
to save the current setting  
results temporarily.  
Connection check  
to conrm the connected units.  
*
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
Click  
Connected: yellowish green  
Not connected: gray  
NOTES:  
Be sure to register at least one area to the area number 01.  
(“1” is entered in the cell for the area number 01 as default.)  
Shows a port no. of the central control unit to connect with  
a room sub control unit or add-on control unit.  
A call number displayed on the master station monitor consists of  
an area number plus a station number.  
Registering zones  
[System setting – Zone registration]  
Shows the ID setting of the room sub control unit or add-  
on control unit set by the ID setting switches. (Refer to the  
INSTALLATION MANUAL for details.)  
Register zones for paging (transmitting announcements and  
chime). The number to which a name is entered is registered  
as a zone number. Up to 99 zones can be registered.  
Temporarily stored  
Click  
to save the current setting  
* Zones are groups of stations designated for paging and chime  
paging.  
3
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
Click Zone registration in the table of contents.  
1
Enter a zone name in the cell for the target zone  
number.  
2
*
The gures under "Number" in the table means the zone  
number.  
Enter zone names in the cells for other numbers to  
register more zones.  
3
4
Temporarily stored  
Click  
to save the current setting  
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
12  
 
Station number  
Registering stations and PA outputs  
[System setting – Registering stations]  
Click to assign sequential numbers to all the checked  
stations from top to bottom. The number you enter will  
be set as the rst number and will be assigned to the top  
station of the ones checked. Other checked stations will  
be numbered sequentially.  
Register all the stations and PA outputs connected in the  
system, and set the area, station no., station name (or PA  
output name) and type of station (for sub stations: video door/  
audio door/room sub stations) to them.  
Station name  
Click Registering stations in the table of contents.  
Click to assign the same station (and/or PA output) name  
and sequential numbers to all the checked stations (and/  
or PA outputs) from the top down. Enter a name only.  
1
Station type  
(sub stations)  
Click to set the same station type to all the checked sub  
Set the area, station no., station name and type of  
station (for sub stations) to the target stations, and  
enter names to the target PA outputs.  
stations.  
2
How to select multiple stations  
Click to check the stations and PA outputs you will  
register.  
*
Setting the station no. is required.  
*
Shows a port no. of the control unit to connect with a  
station.  
By clicking the button for the control unit, all the stations  
and PA outputs connected to it are checked or canceled.  
*
It is required to enter a name to the target PA  
output when an external unit is connected to the  
corresponding PA output terminals.  
*
*
For a cell with the  
pull-down menu.  
mark, select the target one from the  
Do not set stations with the same number in an area.  
By clicking the button on the top of the list, you can  
check or cancel all the stations and PA outputs on the  
list.  
NOTE:  
The name of a master station displayed on its monitor in standby  
mode is up to 16 alphanumeric characters.  
Other buttons  
Connection check  
Click to conrm the connected units.  
Connected: yellowish green  
Not connected: gray  
Station type error: pink  
[Collective setting]:  
Temporarily stored  
Click  
to save the current setting  
3
The following buttons are used to make the settings to all  
the checked stations at one time.  
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
*
Pressing each button opens another window.  
NOTE:  
Be sure to check all the target stations before using these  
buttons.  
Area  
Click to set the same area number to all the checked  
stations.  
13  
 
Making detailed settings to door  
stations or room sub stations  
Making detailed settings to stations and  
control units  
[System setting – Advanced station settings]  
NOTE:  
Make the settings to door stations or room sub stations  
respectively. You cannot select a video door station, audio door  
station and a room sub station at the same time.  
Make detailed settings for the registered stations and control  
units. The settings can be made to a station or control unit  
individually, or multiple stations of the same type at a time. The  
setting items differ from the station or control unit type. First  
select a station (or stations) or control unit, and then open the  
“Advanced settings” window to make the settings.  
The following setting item buttons are displayed in the  
“Advanced settings” window.  
A
Basic setting procedure  
(room sub stations only)  
Click Advanced station settings in the table of  
contents.  
B
C
*
*
Click one of the buttons A B and C to open the  
corresponding setting window, and then make the  
settings in the displayed window(s). See the detailed  
,
instructions for A B or C below.  
,
Close  
the previous window.  
Click  
to close the current window and return to  
Click to check the station(s) or control unit where detailed  
settings are to be made.  
*
Multiple stations of the same type can be set together.  
(Control units should be set respectively.)  
*
All stations of the same type can be selected by clicking the  
corresponding button under [Select all by type].  
A
Settings on [Called stations] setting window  
Set the master station(s) that is (are) to be called from the  
selected station(s).  
*
Up to 20 master stations can be set.  
Advanced settings  
The “Advanced settings” window for the selected station type  
or control unit opens.  
Click  
.
Select the “Call priority” from the pull-down menu.  
1
2
Reference  
Click  
to open another window, then check  
Close  
the target master stations, and then click  
return to the previous window.  
to  
The selected master stations are added and  
displayed in the list.  
Make the settings in the displayed windows.  
For door and room sub stations  
The right column of this page  
For master stations  
P.15  
For control units  
P.16  
*
To delete a station (or stations) from the list, check the  
target station(s) in the list and click Delete .  
Repeat step 2 to add more master stations.  
3
4
When you have nished making all the detailed settings:  
Close  
Click  
to close the current window and return to  
the previous window.  
Temporarily stored  
Click  
results temporarily.  
to save the current setting  
*
If you wish to cancel the setting results you have made, click  
a title in the table of contents or “Refresh” in the web browser  
menu.  
14  
 
B
Settings on [Contact input] window (for room  
sub stations only)  
Make settings for contact input.  
Making detailed settings to master  
stations  
[Contact type]:  
Select either Normally open (NO) or Normally closed (NC).  
The following setting item buttons are displayed in the  
“Advanced settings” window.  
[Call priority/Answering the page]:  
D
E
You can select the action of the station when detecting  
input between ‘calling with appropriate priority’ and  
‘answering the page’.  
Select “Normal”, “Priority”, “Urgent” or “Answering the  
page”.  
*
*
Click either the button D or E to open the  
corresponding setting window, and then make the  
settings in the displayed window(s). See the detailed  
Close  
Click this to close the current window and return to the  
previous window.  
instructions for  
Close  
or  
below.  
D
E
Click  
to close the current window and return to  
C
Settings on [Other] window  
the previous window.  
[Transmit volume boost at PTT]:  
Select whether to increase the press-to-talk sound  
volume transmitted to the stations (ON) or not (OFF).  
[Camera zoom image preset] (video door stations  
only):  
D
Settings on [Stations to be scan monitored]  
window  
Set the scan-monitoring target sub station(s).  
Select the default of camera’s Zoom/Wide function at  
calling from the 9 zoom positions and "0" (wide) from the  
pull-down menu.  
*
Up to 20 sub stations can be set.  
[Call acknowledge tone on/off]:  
Reference  
Click  
to open another window, then select  
Close  
Select whether to sound the call acknowledge tone of  
door station or room sub station (ON) or not (OFF).  
1
the target stations, and then click  
the previous window.  
to return to  
[Backlight adjustment] (video door stations only):  
The selected stations are added and displayed in the  
list.  
Select the method of adjusting the backlight in the  
daytime between “Exposure +” and “Exposure –”.  
*
To delete a station (or stations) from the list, check the  
[Speaker] (room sub stations only):  
Delete  
target station(s) in the list and click  
.
Select the speaker to be used between “Built-in speaker”  
and “External speaker”.  
Repeat step 1 to register more stations.  
2
3
*
When “External speaker” is selected, no sound will be  
output from the built-in speaker.  
Close  
Click  
to close the current window and return to  
the previous window.  
Close  
Click this to close the current window and return to the  
previous window.  
E
Settings on [Other] window  
About the priority  
[Master station function: paging, chime, monitor,  
door release, and remote site call]:  
When receiving two or more functions (communication, calling,  
paging, monitoring, etc.) at the same time, depending on the  
priority setting, the order of priority for them is as follows.  
Select whether to enable the following functions of  
master station (ON) or not (OFF).  
Starting paging  
Priority  
1 (high)  
2
Setting  
[Urgent]  
[Priority]  
[Normal]  
-
Function  
Communication, calling,  
paging, chime paging  
Starting chime paging  
Monitoring/scan-monitoring  
Releasing door  
3
4 (low)  
Monitoring, scan-monitoring  
Remote site call (standard (IP) system only)  
Close  
Click this to close the current window and return to the  
previous window.  
15  
 
[Sound source]:  
Making detailed settings to the central control  
unit, add-on control unit(s) or room sub  
control unit(s)  
Select either [Internal sound source] or [External  
sound source] as the source of chime. When [Internal  
sound source] is selected, select a sound le or  
sequence from the registered ones in the list.  
(You need to register sound les and/or sound  
sequences in advance. (P. 17-18))  
When [External sound source] is selected, select  
either “External sound source 1” or “External sound  
source 2”.  
[Chime priority]:  
Select the priority of chime paging from among  
“Normal”, “Priority” and “Urgent”.  
[Zone name]:  
Select the target zone of chime paging from the  
registered ones in the list.  
NOTE:  
Make the settings to the central control unit, add-on control  
unit(s) or room sub control unit(s) respectively. You cannot select  
multiple control units at the same time.  
The following setting item buttons are displayed in the  
“Advanced settings” window.  
(central control unit only)  
F
Repeat step 1 to 3 to make the settings to other  
terminals.  
4
5
G
Close  
Click  
to close the current window and return to  
*
*
Click either the button F or G to open the  
corresponding setting window, and then make the  
the previous window.  
settings in the displayed window(s). See the detailed  
instructions for F or G below.  
G
Settings on [Contact output] window  
Set the trigger condition to each of the CONTACT OUTPUT  
terminals.  
Close  
the previous window.  
Click  
to close the current window and return to  
Select an output terminal from the pull-down menu.  
1
F
Settings on [Contact input] window (for central  
control unit only)  
Set the input method to each of the CONTACT INPUT  
terminals.  
*
Select from L1 to L8 for the central control unit, and  
select from L1 to L4 for the add-on control unit and room  
sub control unit.  
[Contact type]:  
Select either Normally open (NO) or Normally closed  
(NC).  
2
3
Select the input terminal from S1 to S4 from the pull-  
down menu.  
1
[Trigger condition]:  
Select the action as the trigger condition from among  
the following. When the selected action is detected,  
output is triggered.  
[Contact type]:  
Select either Normally open (NO) or Normally closed  
(NC).  
2
3
[None]:  
No output will be triggered.  
[Trigger condition]:  
[Calling notice]:  
Set ON or OFF for “Normal”, “Priority” or “Urgent”.  
Select [None], [Broadcast chime] or [Stop chime] as  
the trigger condition. When an input is detected, the  
selected action is triggered.  
[Door release]:  
Select one of the registered sub stations in the list  
to which an electric door strike is connected. (Click  
[None]:  
None will be triggered if an input is detected.  
Reference  
, and then select the target station.)  
[External sound source] (central control unit only):  
Select either “External sound source 1” or “External  
sound source 2” connected to the central control unit.  
[Broadcast chime]:  
Chime paging to the designated zone is triggered if an  
input is detected.  
[PA output]:  
Select from among “PA output 1” to “PA output 4”  
connected to the control unit.  
[Stop chime]:  
The currently-transmitted chime is stopped if an input is  
detected.  
Repeat step 1 to 3 to make the settings to other  
terminals.  
4
5
*
Only when [Broadcast chime] is selected, the following  
items are valid.  
Close  
Click  
to close the current window and return to  
the previous window.  
16  
 
Registering stations and PA outputs to zones  
Registering sound les for chime  
[
System setting – Zone setting]  
[Chime setting – Registering sound source]  
Assign stations and PA outputs to the registered zones.  
Register sound data as the source of each chime. Copy MP3-  
format sound les onto the PC in advance. (Only MP3 les can  
be registered in the system.)  
Click Zone setting in the table of contents.  
1
* Up to 3MB of the total amount of les can be registered.  
* Use sound les compliant with the specications below.  
Click Registering sound source in the table of  
contents.  
1
Select a zone from the pull-down menu.  
2
Add  
Click  
.
2
Another window opens.  
Browse...  
Click  
and select a sound le on the PC.  
Reference  
Click  
to display all the stations registered  
3
4
3
4
to the system.  
Upload  
Click  
to save.  
Another window opens and the registered stations are  
displayed in the list.  
When uploading the le is completed successfully, the  
current window closes. In the previous window, the  
selection result is displayed in the list.  
Check to select the target stations.  
*
If a small-size sound le is registered, a le size different  
from the actual one may be displayed.  
Repeat step 2 to 4 to register more sound les.  
5
*
If you wish to delete a sound le, check it in the list, and  
then click Delete .  
Sound le specications  
Select stations in the following ways.  
Item  
File name  
File format  
Bit rate  
Sampling frequency  
Channels  
Recommended value  
Up to 24 alphanumeric characters  
MP3*1  
64 kbps  
44.1 kHz  
Select stations by checking one by one.  
All stations of the same type can be selected by  
clicking the corresponding button under [Select all by  
type].  
1 ch (monaural)  
3MB in total, 2MB/le  
By clicking the button for the control unit, all the  
stations connected to it are checked or canceled.  
By clicking the button on the top of the list, all the  
stations are checked or canceled.  
Maximum total data size  
*1: MP3-format sound les with tags may not be played with this  
system. Before registering an MP3-format sound le, delete the tag  
from the le.  
Close  
Click  
after you have nished selecting the  
5
6
stations.  
In the previous window, the selection results are displayed  
in the list.  
*
When canceling a registered station, check the station in  
the list, then click Delete .  
*
Register PA outputs in the same way as the stations.  
Temporarily stored  
Click  
to save the current setting  
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
17  
 
Registering sound sequences  
Registering daily chime schedule  
[Chime setting – Registering sound sequences]  
[Chime setting – Registering daily chime schedule]  
Register sound sequences for chime.  
Up to 10 daily schedules can be registered.  
Click Registering daily chime schedule in the table  
of contents.  
*
Up to 20 sequences can be registered.  
1
Click Registering sound sequences in the table of  
contents.  
1
[Schedule number]:  
Select the schedule number to register the daily  
schedule from the pull-down menu.  
2
[Sound number]:  
2
3
Select the sound number to register a sound sequence  
from the pull-down menu.  
[Schedule name]:  
Enter the name of daily schedule.  
3
[Sound sequence name]:  
Enter the name of sound sequence.  
Add  
Click  
to add programs.  
4
Another window appears.  
Add  
Click  
to add sound les to the sound sequence.  
4
5
Another window appears.  
[Chime time]:  
Set the starting time (hour, minute and second).  
5
6
[Step]:  
Select an unused step number from the pull-down menu.  
[Sound source]:  
*
If the selected step number is already used, it can be set  
with a new sound source and the old and subsequent  
ones are renumbered with the following numbers.  
Check [Sound le], [Sound sequence] or [External  
sound source], and select a le, sequence or external  
sound source from the pull-down menu.  
*
*
If an unused number exists before the number you  
selected, the unused number is re-selected automatically.  
Up to 10 steps can be used.  
[Zone number]:  
Select the target zone for transmitting chime from the  
pull-down menu.  
7
8
[Sound source]:  
6
7
Select a sound le from the registered ones and set the  
repeating time (from 1 to 10) of the sound.  
[Chime priority]:  
Select the priority of transmitting chime from among  
“Normal”, “Priority” or “Urgent” from the pull-down  
menu.  
When you have nished the setting on this window,  
Close  
click  
.
When you have nished the settings on this screen,  
9
In the previous window, the registered sound les are  
displayed in the list.  
Close  
click  
.
In the previous window, the added program is displayed in  
the list.  
Repeat step 2 to 7 to register more sound sequences.  
8
Other buttons  
10 Repeat step 4 to 9 to add more programs.  
Edit  
Other buttons  
If you wish to modify, check the le in the list, and then  
Edit  
click Edit .  
If you wish to modify a program, check the program in  
Delete  
Edit  
the list, and then click  
Delete  
When deleting an added sound le, check the le in the  
list, and then click Delete .  
When deleting a program, check the program in the list,  
and then click Delete .  
Temporarily stored  
Click  
to save the current setting  
9
results temporarily.  
Temporarily stored  
to save the current setting  
11 Click  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
18  
 
H
Settings on [Weekly schedule] setting window  
Setting chime schedule  
[Chime setting – Chime schedule setting]  
1) Select either [Every week] or [Every other week].  
2) Set the schedule start and end dates.  
You can set a weekly chime schedule or individual daily  
schedule.  
*
The monthly calendar is displayed by clicking  
Refer calendar and you can select the start and  
end dates.  
* The settings can be made to 1 year ahead.  
*
If necessary, you can change the month by clicking  
or  
.
Click Chime schedule setting in the table of  
contents.  
1
Weekly schedule  
Make the settings by clicking  
,
2
Individual schedule  
Schedule download  
respectively to open the corresponding window.  
and  
3) Set one of the registered daily chime schedules or no  
schedule to each day of the week. (Select one from the  
pull-down menu.)  
H
I
I
J
Settings on [Individual schedule] setting window  
Set an individual schedule to the target date.  
Individual schedule  
should be clicked after the target  
date is clicked on the calendar.  
*
*
[Individual schedule] setting window will not open if you  
have not selected the target date on the calendar in the  
[Chime schedule setting] window.  
Make the settings in the displayed window(s).  
or  
1) If necessary, you can change the date by clicking  
3
4
repeatedly.  
2) [Daily chime schedule]:  
Select one of the registered daily chime schedules or  
no schedule (to register a new schedule), from the pull-  
down menu.  
H
I
J
See the detailed instructions for  
right column of this page.  
,
or  
on the  
3) If necessary, modify a registered schedule or register a  
new schedule.  
After the setting is nished on the corresponding  
To register a new schedule:  
Close  
window, click  
to close the window.  
Add  
Click  
.
Calendar and setting status can be checked for the  
selected month.  
Another window opens. In this window, you can set  
[Chime time], [Sound source], [Zone number] and  
[Chime priority].  
The registered daily chime schedules are identied by  
colors and shown on the calendar.  
Close  
When the settings have nished, click  
to  
close this window. In the previous window, the added  
program is displayed in the list.  
*
Repeat this procedure to add more programs.  
To modify a registered schedule:  
Check the program you wish to modify, and then click  
Edit  
. Another window opens. Change the settings in  
this window.  
When nished modifying, click  
window.  
Close  
to close this  
*
You can also modify the registered schedule by  
adding new program(s) or deleting program(s). (To  
delete, check the target program(s) in the list and  
Delete  
then click  
.)  
*
When modied, [Daily chime schedule] changes to  
“Individual schedule.”  
Temporarily stored  
Click  
to save the current setting  
5
6
results temporarily.  
To delete a registered schedule:  
Select “None” from the pull-down menu of [Daily  
chime schedule].  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
J
When the settings on this window have nished, update  
the system from [Updating the system]. (P. 22)  
Downloading chime schedule data  
You can store the chime schedule setting data in CSV  
format onto a PC.  
*
The data includes the transfer schedule setting (P. 20)  
data along with the chime schedule setting data.  
19  
 
Registering daily transfer schedule  
[Transfer setting – Registering daily  
transfer schedule]  
Setting transfer schedule  
[Transfer setting – Transfer schedule setting]  
You can set a weekly transfer schedule and individual daily  
schedule.  
You can set the schedule for transferring calls to other master  
stations automatically. The schedules registered on this setting  
are used when making a transfer setting on a master station.  
*
The settings can be made 1 year ahead.  
Click Transfer schedule setting in the table of  
contents.  
1
Up to 2 daily schedules can be registered.  
Click Registering daily transfer schedule in the  
table of contents.  
Weekly schedule  
Make the settings by clicking  
1
2
Individual schedule  
and  
respectively to open the  
corresponding window.  
K
L
[Schedule number]:  
2
Individual schedule  
date is clicked on the calendar.  
Select the schedule number DT1 or DT2 from the  
pull-down menu.  
*
should be clicked after the target  
[Schedule name]:  
Enter the name of daily schedule.  
Make the settings in the displayed window(s).  
3
3
4
[Call transfer time]:  
Set the [Start time (hour and minute)] and [End time  
(hour and minute)] of transferring.  
4
K
L
See the detailed instructions for  
next page.  
or  
on the  
Temporarily stored  
Click  
to save the current setting  
5
results temporarily.  
After the setting is nished on the corresponding  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
Close  
window, click  
to close the window.  
Calendar and setting status can be checked for the  
selected month.  
The registered daily transfer schedules are  
identied by colors and shown on the calendar.  
Temporarily stored  
Click  
to save the current setting  
5
6
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
When the settings on this window have nished, update  
the system from [Updating the system]. (P. 22)  
20  
 
K
Settings on [Weekly schedule] setting window  
Setting the timer [Timer setting]  
1) Select either [Every week] or [Every other week].  
2) Set the schedule start and end dates.  
Set the time for each operation.  
Click Timer setting in the table of contents.  
*
The monthly calendar is displayed by clicking  
Refer calendar and you can select the start and  
end dates.  
1
*
If necessary, you can change the month by clicking  
or  
.
3) Set one of the registered daily transfer schedules or no  
schedule to each day of the week. (Select one from the  
pull-down menu.)  
Set the time for the following operations respectively.  
2
*
The setting range is displayed on the right side of each  
input box.  
L
Settings on [Individual schedule] setting window  
Set an individual schedule to the target date.  
[Call]:  
Set the duration of call from door stations and room sub  
stations to [Normal], [Priority] or [Urgent].  
*
[Individual schedule] setting window will not open if you  
have not selected the target date on the calendar in the  
[Transfer schedule setting] window.  
[Communication In Local]:  
Set the duration of communication between stations.  
or  
1) If necessary, you can change the date by clicking  
[Paging]:  
repeatedly.  
Set the duration of paging.  
2) [Daily transfer schedule]:  
[Monitor]:  
Select either of the registered daily schedules (DT1 or  
DT2) or no schedule from the pull-down menu.  
Set the duration of monitoring only one station.  
3) [Call transfer time]:  
[Scan monitor: Switching]:  
Set the duration of monitoring each station while scan-  
monitoring.  
When “DT1” or “DT2” is selected:  
The call transfer time is automatically entered.  
If necessary, change the [Start time (hour and  
minute)] and [End time (hour and minute)] of  
transferring manually.  
[Contact output]:  
Set the duration of chime from the external sound source  
1 and 2, triggered by contact output of the central control  
unit (IS-CCU).  
When no schedule is selected:  
Enter the call transfer time manually.  
[Door release]:  
*
When the time is entered or changed manually, [Daily  
transfer schedule] changes to “Individual schedule”.  
Set the duration of door release.  
*
If you set the time to “0”, the door is released while  
the door release button on the master station is held  
down.  
Temporarily stored  
Click  
to save the current setting  
3
results temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
21  
 
Setting time and date  
[Time and date setting]  
Downloading/uploading setting data  
[Setting le]  
Set the time and date of the system, used for chime schedule  
and transfer schedule.  
You can download the setting data you have made into a le  
and save it on the PC. On the contrary, you can upload the  
setting data from the PC.  
Click Time and date setting in the table of contents.  
1
*
It is recommended to download the setting data as a backup  
copy after you nish making settings or setting changes.  
When downloading setting data onto the PC  
Click Downloading setting data in the table of  
contents.  
1
Set the following settings.  
2
Required  
[Set current time]  
:
Set the current time and date in one of the following  
methods.  
Input the current time and date manually, and then  
Click  
into a le.  
to download the current setting data  
Download  
2
Manual setting  
click  
.
Synchronized with PC  
and date by making it synchronized with the PC.  
Click  
to set the current time  
NOTE:  
MP3-format sound files registered at [Chime setting – Registering  
sound source] will not be downloaded from the system by this  
operation.  
It is recommended that you also save the registered MP3 files  
separately.  
You can also set the current time and date by making it  
synchronized with NTP server [Synchronized with NTP  
server] as shown below.  
*
If there is no power supply to the system for a long  
time because of power failure etc., the time and date  
setting may be cleared.  
When uploading setting data  
Click Uploading setting data in the table of contents.  
[NTP (Network Time Protocol)]:  
1
Set [Synchronized with NTP server] to ON to set the  
current time and date by making it synchronized with  
NTP server. Then set the [NTP server] and [NTP port  
number].  
*
[NTP server]:  
Enter the IP address or domain name of the NTP  
server to be used as the master clock.  
Click  
to the system.  
You can select the setting data le from another window,  
and upload it.  
to upload the setting data from the PC  
Upload  
2
3
[UTC time zone]:  
Set the time differences from Coordinated Universal  
Time (UTC). Set the [Hour difference] and [Minute  
difference] respectively.  
Update the system.  
*
Refer to “Updating the system” below.  
[Synchronize interval]:  
NOTE:  
Set the time data acquisition interval (hour) from the  
NTP server, and the interval of synchronization with  
the system.  
Uploading the setting data will overwrite the current data.  
*
Upload sound les separately to register them as the internal  
sound sources.  
[Daylight savings time]:  
Set whether to utilize daylight savings time (ON) or  
(OFF). When set to ON, then set the start and end  
times (Month, Week of the month, Day of the week,  
Hour and Minute), and time differences (Hour and  
Minute).  
Updating the system [Updating the system]  
Update the system with the setting data you have entered  
(currently stored temporarily).  
*
It is recommended to connect the system with a PC or  
NTP server constantly to keep the correct time and date  
setting.  
Click Updating the system in the table of contents.  
1
Temporarily stored  
Click  
to save the current setting  
3
results temporarily.  
Click  
to update the system with the setting  
Update  
2
data currently stored temporarily.  
*
If you wish to cancel the setting results you have made,  
click a title in the table of contents or “Refresh” in the  
web browser menu.  
NOTE:  
Do not turn off the system while updating the system.  
22  
 
MAINTENANCE  
This section describes the use of functions for the system maintenance. These functions are available on the web server.  
Initializing the system [Initialization]  
Updating the rmware [Firmware update]  
Downloading updated rmware data  
You can reset the system settings to factory default.  
Please access our web page at http://www.aiphone.net/ and  
download the rmware data on the PC to update the system.  
For the download procedure, see the instructions on our web  
page.  
Access the web browser and log in.  
(P. 9)  
1
Click Initialization in the table of contents.  
2
Access the web browser and log in. (P. 9)  
1
Click Firmware update in the table of contents.  
2
Click  
.
Initialization  
3
Downloading system log [System log]  
Click  
.
Update  
3
Another window opens.  
You can acquire the system operation log.  
Click  
and select the target rmware.  
Browse...  
4
5
Access the web browser and log in.  
(P. 9)  
1
When the rmware is displayed in the window, click  
Upload  
.
Click System log in the table of contents.  
2
When “Update rmware.” is displayed, the update process  
is complete.  
NOTES:  
If the power is turned off while it is writing, the product will  
malfunction.  
The system may not operate normally while updating the  
firmware.  
Click  
to acquire the log from the system.  
Download  
3
4
NOTE:  
Conrm the log, and save it as needed.  
If the update fails, try again.  
NOTE:  
The log is overwritten constantly from the oldest records.  
Referring to the troubleshooting guide  
[Troubleshooting]  
Click Troubleshooting.  
1
The following information appears in the window.  
Information about the online-help that you can refer to  
when trouble occurs in setting the system.  
Supported characters and symbols  
Registering your system [Registration]  
Click Registration in the table of contents.  
1
2
Register  
Click  
to open the registration window, and  
then register your system on the window.  
NOTE:  
The central control unit (IS-CCU) must be connected to the IP  
network to register your system.  
23  
 
AIPHONE CO., LTD., NAGOYA, JAPAN  
AIPHONE CORPORATION, BELLEVUE, WA, USA  
AIPHONE S.A.S., LISSES-EVRY, FRANCE  
 

3Com Network Card 3C855 User Manual
Accusplit Fitness Electronics 1520M2 User Manual
Air King Greenhouse Kit Ak922 User Manual
Airlink101 Switch AGIGA5SW B User Manual
AMD Computer Hardware 10 User Manual
American Standard Hot Tub 015 0205 User Manual
Asus Computer Hardware 90MB0DR0M0AAY0 User Manual
ATI Technologies Tiller 365 User Manual
ATO Speaker System SCM50ASL PRO User Manual
Behringer Musical Instrument PMH660M PMH880S User Manual