Aiphone Marine Radio NE SS 1G User Manual

Vandal and Weather Resistant 1-Gang Sub Station  
- INSTRUCTIONS -  
The NE-SS-1G is a 1-gang vandal proof and weather resistant sub stations designed for use with the NEM, NDR and  
NDRM systems. This unit is constructed of 12 gauge stainless steel and is equipped with an option for an external output  
contact closure when the sub station places a call (relay required). The unit either flush mounts into a 1-gang box, or  
surface mounts with the SBX-1G. Each unit includes tamper proof screws and a tool for installation.  
INSTALLATION:  
1. For flush mounting, install sub station in standard 1-gang electrical box with min. 2-1/2" depth.  
2. For surface mounting, install sub station in the SBX-1G surface mount enclosure.  
3. IMPORTANT! This unit is designed for use in normal weather conditions, and is made to allow for drainage and  
evaporation of moisture that naturally gets into it. Do not apply caulking or silicone sealant around the unit  
when installing, and do not use weather stripping around the perimeter of the box when mounting. If  
sealing the unit is required, the bottom must remain unsealed. Sealing the unit will prevent or inhibit moisture from  
dissipating from inside the unit, which may cause corrosion or deterioration to the internal components over time.  
Warranty does not cover damage caused by sealing the unit.  
1-1516”  
NE-SS-1G  
SPEAKER  
2-” 3-¼”  
Back View  
CALL BUTTON WITH  
CALL ASSURANCE LED  
WIRING DIAGRAM:  
NE-SS-1G  
NEM Master  
NE-SS-1G  
(w/dry closure output)  
Red  
1
2
Red  
3
NE-SS-1G  
(w/corridor lamp)  
~
20  
Red  
PS-2420UL  
Blk  
Blu  
Blk  
Blu  
E
+
-
+
-
NBY-4A  
Wht  
Blk  
Blk  
Blk  
Blu  
H
Blu  
Blu  
RY-PA  
Dry closure  
output for  
Yel  
duration of call-in  
WIRE DESIGNATIONS:  
Red: + side of speaker. Connect to station number on master station.  
Blue: Trigger for corridor lamp. 7V DC when call-in signal is activated.  
Black: - side of speaker (common). Connect to E on master station.  
White: Negative trigger wire for extra relay contact closure at sub during call-in.  
Small wht & blk: Speaker connection to PCB  
Small brn (x2): Call button connection to PCB  
Page 1  
 

Agilent Technologies Stud Sensor 85037 90013 User Manual
Akai Computer Monitor PDP4273M User Manual
Allied Telesis Network Router CG WLBARGO User Manual
AOSafety Home Safety Product GlareX User Manual
Atlantic Car Video System 240 DVD User Manual
Avenview Switch SPLIT DVI 2 User Manual
Avet Reels Fishing Equipment MXL 6 4 User Manual
BC Speakers Portable Speaker ME45 User Manual
Beckett Water Gardening Outdoor Fountain BL25LED User Manual
Beko Oven MF 5 User Manual