BB Electronics Switch EIR508 Series User Manual

EIR508 Series-5107qsg  
Quick Start Guide  
4
3
DIP Switch Settings  
LED Chart  
Elinx Managed Ethernet Switch  
EIR508 Series  
LED  
Status  
Green  
Off  
Green  
Off  
Green  
Off  
Yellow  
Off  
Green  
Off  
Green  
Blinking  
Off  
Yellow  
Blinking  
Off  
Green  
Yellow  
Meaning  
The Switch is powered on  
The Switch is powered off  
Power Source 1 is available  
Power Source 1 is unavailable  
Power Source 1 is available  
Power Source 2 is unavailable  
Power Source failure or Port Failure  
Normal Operation  
Ring Master (Master of a redundant ring)  
The switch is not a Ring Master  
The port is linked  
The port is receiving or transmitting packets  
No device attached  
Power  
Pos Status Description  
OFF  
Disable port 1 Alarm  
Power 1  
Power 2  
Fault  
1
2
3
4
5
Enable port 1 Alarm  
(If port 1 link fails, the fault LED will light)  
Disable port 2 Alarm  
Enable port 2 Alarm  
(If port 2 link fails, the fault LED will light)  
Disable port 3 Alarm  
Enable port 3 Alarm  
(If port 3 link fails, the fault LED will light)  
Disable port 4 Alarm  
Enable port 4 Alarm  
(If port 4 link fails, the fault LED will light)  
Disable port 5 Alarm  
Enable port 5 Alarm  
(If port 5 link fails, the fault LED will light)  
ON  
OFF  
ON  
OFF  
ON  
R.M.  
LNK/ACT  
Ports 7 & 8  
OFF  
ON  
Full Duplex Mode  
Data Collision  
Half Duplex Mode  
OFF  
ON  
FDX/COL  
Ports 7 & 8  
10/100 Ports  
OFF  
Disable port 6 Alarm  
6
7
8
9
Enable port 6 Alarm  
(If port 6 link fails, the fault LED will light)  
Disable port 7 Alarm  
Enable port 7 Alarm.  
ON  
OFF  
ON  
1
2
5
(If port 7 link fails, the fault LED will light)  
Items Included  
Hardware Installation  
OFF  
ON  
Disable port 8 Alarm  
Enable port 8 Alarm  
o
o
o
o
Ethernet Switch  
(If port 8 link fails, the fault LED will light)  
Disable the ring master function.  
Enable the switch as the ring master  
in the redundant ring group.  
CD with Support Manual  
This Quick Start Guide  
Panel Mount Bracket  
o
Record the switch’s MAC Address in the space  
provided. The MAC Address is printed on the product  
label. Provide the MAC Address to your Network  
Administrator. The Network Administrator should  
provide an IP Address, Subnet Mask, and Gateway.  
Select a mounting location and install with the attached  
DIN rail clip or included panel mount kit.  
OFF  
ON  
o
o
Default Settings  
Connect power to the switch  
o
o
12 to 48 VDC  
Redundant DC input is available with fault  
contacts.  
o
o
o
o
IP Address: 192.168.16.1  
Subnet Mask: 255.255.255.0  
Gateway: 192.168.16.254  
User Name: root, Password: root  
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA  
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland  
+353 91 792444 Fax +353 91 792445  
 

Aastra Telecom Telephone 9417CW User Manual
AG Neovo Computer Monitor F 315 User Manual
AKG Acoustics Microphone C747 User Manual
Amcor GPS Receiver Bluetooth User Manual
American DJ DJ Equipment Ruby Star User Manual
American Standard Outdoor Shower 1660125 User Manual
American Standard Outdoor Shower T03850X User Manual
American Standard Plumbing Product 71002XX User Manual
Atlona Plumbing Product AT PROHD48M R User Manual
Audiovox Radio P 963ESP User Manual