Beko Clothes Dryer DPY 7504 XB1 User Manual

DPY 7504 XB1  
Dryer  
User Manual  
2960310883_KM/280314.2210  
 
1 Important safety and environmental instructions  
This section contains safety instructions that will help protect from risk of  
personal injury or property damage. Failure to follow these instructions shall  
void any warranty.  
1.1 General safety  
Dryer can be used by the children at the age of 8 and over and the  
persons with physical, sensory or mental disorders or unlearned or  
inexperienced people as long as they are attended by a person who  
will be responsible for their safety or who will instruct them accordingly  
about use of the product. Children should not tamper with the machine.  
Cleaning and user maintenance works should not be carried out by the  
children unless they are attended by someone.  
Adjustable feet should not be removed. (See 2.1 Overview) The  
gap between the dryer and the surface should not be reduced by the  
materials such as carpet, wood and tape. This will cause problems with  
the dryer.  
Always have the installation and repairing procedures carried out by the  
Authorized Service Agent. Manufacturer shall not be held liable for  
damages that may arise from procedures carried out by unauthorized  
persons.  
Never wash the dryer by spraying or pouring water onto it! There is the  
risk of electric shock!  
 
Dryer / User Manual  
3 / 32 EN  
Important safety and environmental instructions  
1.1.1 Electrical safety  
A Electrical safety instructions should be followed while electrical  
connection is made during the installation.  
Connect the dryer to a grounded outlet protected by a fuse at the value  
specified on the type label. (See 2.1 Overview) Have the grounding  
installation performed by a qualified electrician. Our company shall not  
be liable for any damages that will arise when the dryer is used without  
grounding in accordance with the local regulations.  
The voltage and allowed fuse protection is stated on the type label plate.  
(See 2.1 Overview)  
The voltage specified on the type label must be equal to your mains  
voltage. (See 2.1 Overview)  
Unplug the dryer when it is not in use.  
Unplug the dryer from the mains during installation, maintenance,  
cleaning and repair works.  
Do not touch the plug with wet hands! Never unplug by pulling on the  
cable, always pull out by grabbing the plug.  
Do not use extension cords, multi-plugs or adaptors to connect the dryer  
to power supply in order to decrease the risk of fire and electric shock.  
Power cable plug must be within easy reach after installation.  
B Damaged mains cable should be changed notifying the Authorized  
B If the dryer is faulty, it must not be operated unless it is repaired  
Service.  
by an authorized service agent! There is the risk of electric shock!  
 
Dryer / User Manual  
4 / 32 EN  
Important safety and environmental instructions  
1.1.2 Product safety  
Points to be taken into consideration for fire hazard:  
Below specified laundry or items must not be dried  
in the dryer considering fire hazard.  
Unwashed laundry items  
Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain  
removers, turpentine, paraffin or paraffin removers must be  
washed in hot water with plenty of detergent before being dried  
in the dryer.  
For this reason especially the items containing the above  
specifiedstains must be washed very well, to do thisuse adequate  
detergent and choose a high washing temperature.  
Below specified laundry or items must not be dried in the dryer  
due to the fire hazard:  
Garments or pillows bolstered with rubber foam (latex foam),  
shower bonnets, water resistant textiles, materials with rubber  
reinforcement and rubber foam pads.  
Clothing cleaned with industrial chemicals.  
Items such as lighter, match, coins, metal parts, needle etc.  
may damage the drum set or may lead to functional problems.  
Therefore check all the laundry that you will load into your dryer.  
Never stop your dryer before the programme completes. If you  
must do this, remove all laundry quickly and lay them out to  
dissipate the heat.  
Clothes that are washed inadequately may ignite on their own  
and even may ignite after drying ends.  
 
Dryer / User Manual  
5 / 32 EN  
Important safety and environmental instructions  
Oil-affected items can ignite spontaneously, especially when  
exposed to heat sources such as in a tumble dryer. The items  
become warm, causing an oxidation reaction in the oil. Oxidation  
creates heat. If the heat cannot escape, the items can become  
hot enough to catch fire. Piling, stacking or storing oil-affected  
items can prevent heat from escaping and so create a fire  
hazard.  
If it is unavoidable that fabrics that contain vegetable or cooking  
oil or have been contaminated by hair care products be placed  
in a tumble dryer they should first be washed in hot water with  
extra detergent - this will reduce, but not eliminate, the hazard.  
You must provide enough ventilation in order to prevent gases exiting from  
devices operating with other types of fuels including the naked flame from  
accumulating in the room due to the back fire effect.  
Underwear that contains metal reinforcements should not be  
A dried in the dryer. Dryer may be damaged if metal reinforcements  
come loose and break off during drying.  
Use softeners and similar products in accordance with the  
instructions of their manufacturers.  
C
C
Always clean the lint filter before or after each loading. Never  
operate the dryer without the lint filter installed.  
Never attempt to repair the dryer by yourself. Do not perform any repair  
or replacement procedures on the product even if you know or have the  
ability to perform the required procedure unless it is clearly suggested in  
the operating instructions or the published service manual. Otherwise, you  
will be putting your life and others' lives in danger.  
There must not be a lockable, sliding or hinged door that may block  
the opening of the loading door in the place where your dryer is to be  
installed.  
Install your dryer at places suitable for home use. (Bathroom, closed  
balcony, garage etc.)  
 
Dryer / User Manual  
6 / 32 EN  
Important safety and environmental instructions  
Make sure that pets do not enter the dryer. Check the inside of the dryer  
before operating it.  
Do not lean on the loading door of your dryer when it is open, otherwise it  
may fall over.  
The lint must not be allowed to accumulate around the tumble dryer.  
1.2 Mounting over a washing machine  
A fixing device should be used between the two machines when installing  
the dryer above a washing machine. The fitting device must be installed  
by the authorized service agent.  
Total weight of the washing machine and the dryer -with full load- when  
they are placed on top of each other reaches to approx. 180 kilograms.  
Place the products on a solid floor that has sufficient load carrying  
capacity!  
Washing machine cannot be placed on the dryer. Pay attention  
to the above warnings during the installation on your washing  
A machine.  
Installation Table for Washing Machine and Dryer  
Washing Machine Depth  
Dryer Depth  
62cm  
60 cm 54 cm 50 cm 49 cm 45 cm 40 cm  
Cannot  
Can be Can be Can be Can be Can be Can be  
installed installed installed installed installed installed  
be  
54 cm  
60 cm  
installed  
Cannot Cannot  
Can be Can be Can be Can be Can be  
installed installed installed installed installed  
be  
be  
installed installed  
1.3 Intended use  
Dryer has been designed for domestic use. It is not designed for  
commercial purposes and should not be used for other purposes.  
Use the dryer only for drying laundry that are marked accordingly.  
 
Dryer / User Manual  
7 / 32 EN  
Important safety and environmental instructions  
Manufacturer denies any liability for the damages arising from misuse or  
faulty handling of the product.  
The service life of the dryer that you purchased is 10 years. During this  
period, original spare parts will be available to operate the dryer properly.  
1.4 Children's safety  
Packaging materials are dangerous to children. Keep packaging materials  
away from children.  
Electrical products are dangerous for the children. Keep children away  
from the product when it is operating. Do not let them tamper with the  
dryer. Use the child-proof lock in order to prevent the children to tamper  
with the dryer.  
Child-proof lock is on the control panel. (See 5.12 Child-proof  
lock)  
C
Keep loading door closed even when the dryer is not in use.  
1.5 Compliance with the WEEE Directive and  
disposing of the waste product  
This product does not contain the harmful and prohibited  
substances which are specified in the “Control of the Waste  
Electrical and Electronic Equipments” as published by Republic of  
Turkey Ministry of Environment and Urbanization. It complies with  
the WEEE Directive.  
This product was made of high quality items and materials which  
are recyclable and reusable. Therefore, do not dispose of the product at the  
end of its service life with the domestic and other wastes. Take them to a  
collection point for the recycling of the electrical and electronic devices. Ask  
your local administration for these collection points. By delivering the used  
products to recycling points, contribute to the protection of the environment  
and the natural resources. For children's safety, cut the power cord and  
break the locking mechanism, if any, of the loading door so that the product  
will be nonfunctional before disposing it.  
 
Dryer / User Manual  
8 / 32 EN  
Important safety and environmental instructions  
1.6 Packaging information  
Packaging of the product is made of recyclable materials pursuant to  
our national legislation. Do not dispose of the packaging wastes with the  
domestic waste or other wastes, discard them to the dedicated collection  
points designated by the local authorities.  
Please visit the following website to get more information on the product.  
1.7 Technical Specifications  
EN  
Height (min./max.)  
Width  
Depth  
Laundry drying capacity (max.)  
Net weight (use of plastic lid)  
Net weight (use of glass lid)  
Voltage  
84.6 cm / 86. cm*  
59.5 cm  
60.9 cm  
7 kg**  
49 kg  
51 kg  
Power  
See type labels***  
Main Model Code  
* Min. height: Height with adjustable feet are closed.  
Max. height: Height with adjustable feet are opened maximum.  
** Dry laundry weight before washing.  
*** For the location of the type label on the dryer see 2.1 Overview.  
Technical specifications of the dryer are subject to specification  
without notice to improve the quality of the product.  
Figures in this manual are schematic and may not match the  
product exactly.  
Values stated on markers on the dryer or in the other published  
documentation accompanying with the dryer are obtained in  
laboratory in accordance with the relevant standards. Depending  
on operational and environmental conditions of the dryer, these  
values may vary.  
C
C
C
 
Dryer / User Manual  
9 / 32 EN  
2 Your Dryer  
2.1 Overview  
11  
1
2
10  
3
9
8
4
5
7
6
1. Top panel  
2. Control panel  
3. Loading door  
4. Kick plate opening button  
5. Ventilation grids  
6. Adjustable feet  
7. Kick plate  
8. Type label  
9. Lint filter  
10. Water tank drawer  
11. Power cord  
 
Dryer / User Manual  
10 / 32 EN  
3 Installation  
Before the calling the nearest Authorized Service for the  
installation of the dryer, ensure that electrical installation  
and water drain is appropriate referring to the user's  
manual.(See 3.3 Connecting to the drain and 3.5  
Electrical connection) If they are not suitable, contact  
a qualified electrician and technician to make necessary  
arrangements.  
Do not place the dryer on the power  
cable.  
B
3.2 Removing the transportation  
safety assembly  
Remove the transportation safety  
assembly before using the dryer for the  
first time.  
A
Preparation of the dryer's location  
as well as the electrical and waste  
Open the loading door.  
water installations is under customer's  
C
There is a nylon bag inside the drum that contains a  
piece of styrofoam. Hold it from its section marked  
with XX XX.  
Pull the nylon towards yourself and remove the  
transportation safety assembly.  
responsibility.  
Prior to installation, visually check if the  
dryer has any defects on it. If the drier  
A is damaged, do not have it installed.  
Damaged products cause risks for your  
safety.  
Let your dryer wait for 12 hours before  
starting to use it.  
A
3.1 Appropriate installation location  
Install the dryer on a stable and level surface.  
Dryer is heavy. Do not move it by yourself.  
Operate your dryer in a well ventilated, dust-free  
environment.  
The gap between the dryer and the surface should  
not be reduced by the materials such as carpet,  
wood and tape.  
Do not cover the ventilation grills of the dryer.  
There must not be a lockable, sliding or hinged  
door that may block the opening of the loading  
door in the place where your dryer is to be  
installed.  
Once the dryer is installed, it should stay at the  
same place where its connections have been  
made. When installing the dryer, make sure that  
its rear wall does not touch anywhere (tap, socket,  
etc.).  
Place the dryer at least 1 cm away from the edges  
of other furniture.  
Your dryer can be operated at temperatures  
between +5°C and +35°C. If the operating  
conditions fall outside of this range, operation of  
the dryer will be adversely affected and it can get  
damaged.  
The rear surface of the tumble dryer shall be  
placed against a wall.  
Check that no part of the transportation  
safety assembly remains inside the drum.  
A
3.3 Connecting to the drain  
In products equipped with condenser unit, water  
accumulates in the water tank during the drying cycle.  
You should drain accumulated water after each drying  
cycle.  
You can directly drain accumulated water through the  
water drain hose supplied with the product instead of  
periodically draining the water collected in the water  
tank.  
Connecting the water drain hose  
1-2 Pull hose at the behind of the dryer by hand in  
order to disconnect it from where it is connected.  
Do not use any tools to remove the hose.  
3
Connect one end of the drain hose supplied with  
the dryer to the connection point from where you  
removed the hose of the product in previous step.  
4
Connect the other end of the drain hose directly to  
the wastewater drain or to the washbasin.  
 
Dryer / User Manual  
11 / 32 EN  
Installation  
3.5 Electrical connection  
For specific instructions for electrical connection  
required during installation (see 1.1.1 Electrical  
Safety)  
1
2
4
3.6 Transportation of the dryer  
Unplug the dryer before transporting it.  
Drain all water that has remained in the dryer.  
If direct water drain connection is made, then remove  
the hose connections.  
3
We recommend carrying the dryer in  
upright position. If it is not possible to  
carry the machine in the upright position,  
we recommend carrying it by tilting  
A
towards the right side when looked from  
the front.  
3.7 Warnings about sounds  
Hose connection should be made in a  
safe manner. Your drain house will be  
flooded if the hose comes out of its  
housing during water discharge.  
It is normal to hear a metallic noise  
from the compressor sometimes during  
A
operation.  
C
Water drain hose should be attached to a  
height of maximum 80 cm.  
C
C
Make sure that the water drain hose  
is not stepped on and it is not folded  
between the drain and the machine.  
3.4 Adjusting the feet  
In order to ensure that the dryer operates more silently  
and vibration-free, it must stand level and balanced on  
its feet. Balance the machine by adjusting the feet.  
Turn the feet to left or right until the dryer stands level  
and firmly.  
Water collected during operation is  
pumped to water tank. It is normal to hear  
pumping noise during this process.  
C
Never unscrew the adjustable feet from  
their housings.  
C
 
Dryer / User Manual  
12 / 32 EN  
4 Preparation  
4.1 Laundry suitable for drying in the dryer  
Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are  
suitable for drying in a dryer and make sure that you select the appropriate programme.  
LAUNDRY DRYING SYMBOLS  
Drying  
Symbols  
Suitable for  
dryer  
No Iron  
Do not dry-  
clean  
Sensitive /  
Delicate dry  
Do not dry  
with dryer  
Do not dry  
Drying  
Settings  
Iron -  
Iron at high  
temperature  
Iron at medium  
temperature  
Iron at low  
temperature  
Dry or Steam  
IRON  
200 0C  
150 0C  
110 0C  
Maximum temperature  
4.2 Laundry not suitable for drying in 4.4 Things to be done for energy  
the dryer  
saving  
Following information will help you use the dryer in an  
ecological and energy-efficient manner.  
Delicate embroidered fabrics, woolen, silk  
garments, delicate and valuable fabrics,  
airtight items and tulle curtains are not  
suitable for machine drying.  
Spin your laundry at the highest speed possible  
when washing them. Thus, the drying time  
is shortened and energy consumption is  
reduced.(See 5.7 Programme selection and  
consumption table)  
Sort out the laundry depending on their type and  
thickness. Dry the same type of laundry together.  
For example thin kitchen towels and table clothes  
dries earlier than thick bathroom towels.(See 5.7  
Programme selection and consumption table)  
Follow the instructions in the user manual for  
programme selection.  
C
4.3 Preparing laundry for drying  
Laundry may be tangled with each other after  
washing. Separate the laundry items before  
placing them into the dryer.  
Dry garments having metal accessories such as  
zippers, inside out.  
Fasten the zippers, hooks and buckles and button  
sheets.  
Do not open the loading door of the machine  
during drying unless necessary. If you must  
certainly open the loading door, do not to keep it  
open for a long time.  
Do not add wet laundry while the dryer is in  
operation  
 
Dryer / User Manual  
13 / 32 EN  
Preparation  
Clean the lint filter before or after each drying  
Following weights are given as examples.  
cycle. (See 6. 1 in Maintenance and cleaning)  
Clean the filter drawer regularly either when the  
Filter Drawer Cleaning warning symbol appears  
or after every 5 drying cycles. (See 6.4 in  
Maintenance and cleaning)  
Approximate weights  
Laundry  
(g)*  
1500  
1000  
500  
350  
700  
250  
100  
700  
350  
150  
300  
200  
500  
350  
700  
100  
125  
Cotton quit covers (double)  
Cotton quit covers (single)  
Bed sheets (double)  
Bed sheets (single)  
Large tablecloths  
Small tablecloths  
Tea napkins  
Ventilate the room, where the dryer is located, well  
during drying.  
4.5 Correct load capacity  
Follow the instructions in the “Programme selection and  
consumption table”. Do not load more than the capacity  
values stated in the table.  
Bath towels  
Hand towels  
Blouses  
Cotton shirts  
Shirts  
Cotton dresses  
Dresses  
Jeans  
Handkerchiefs (10 pieces)  
T-Shirts  
It is not recommended to load the dryer  
with laundry exceeding the level indicated  
*Dry laundry weight before washing.  
in the figure. Drying performance will  
C
degrade when the machine is overloaded.  
Furthermore, dryer and the laundry can get  
damaged.  
 
Dryer / User Manual  
14 / 32 EN  
5 Operating the product  
5.1 Control panel  
1
2
3
4
5
6
10  
9
8
7
1. Programme Selection knob  
2. Dryness Level Adjustment button  
3. Audio Warning Level button  
4. Display  
5. On /Off/Cancel button  
6. Start/Pause button  
7. End Time button  
8. Favourite button  
9. Timer Programmes Selection button  
10. Anti-creasing button  
5.2 Display symbols  
Dryness level  
Audio warning smbol  
Filter drawer cleaning warning symbol  
Filter cleaning warning symbol  
Water tank warning symbol  
Start / Pause symbol  
Child lock warning symbol  
End time symbol  
Remaining time indicator*  
Programme progress bar  
Smart grid symbol  
*Time that appears on display indicates the  
remaining time until the end of the programme  
and changes according to the dampness level  
of the laundry and model of the dryer.  
Steam tank warning symbol  
 
Dryer / User Manual  
15 / 32 EN  
Operating the product  
5.3 Preparing the machine  
5.6 Additional programmes  
For special cases, following additional programmes are  
available in the machine.  
1. Plug in your machine.  
2. Place the laundry in the machine.  
3. Press the On/Off/Cancel button for 1 second  
(long).  
4. When your machine is operated for the first time,  
it starts with the declaration programme (wardrobe  
dryness for cottons.)  
Additional programs may differ according  
to the features of your machine.  
C
To obtain better results from your  
dryer, your laundry must be washed  
C at suitable programmes and spun at  
the recommended spin speeds in the  
washing machine..  
Pressing the On/Off/Cancel button  
does not mean that the programme has  
C started. Press Start / Pause button to  
start the program.  
5.4 Programme selection  
1. Decide the appropriate programme from the table  
below which includes drying levels.  
Jeans  
Use this programme to dry your jeans that are spun at  
high speeds in the washing machine.  
2. Select the desired programme with the  
Programme Selection knob.  
Mix  
Use this programme to dry non-pigmenting synthetic  
and cotton laundry items together.  
Only the cotton laundry is dried at  
normal temperature. Thick and multi  
Sports  
Use this programme to dry together the synthetic and  
cotton laundry items and the laundry items made of  
mixed fabrics.  
layered laundry (towels, linens, jeans  
and etc.) are dried in a way that they  
Extra Dry  
do not require ironing before being  
placed in the wardrobe.  
Wool Refresh  
Use this programme to ventilate and soften the woolen  
laundry that can be washed in the washing machine.  
Do not use to dry the laundry completely. Take out and  
ventilate the laundry immediately after the programme  
is over.  
Normal laundry (tablecloths,  
underwear and etc.) are dried in a  
way that they do not require ironing  
before being placed in the wardrobe.  
Cupboard Dry  
Normal laundry (shirts, dresses and  
Iron Dry  
Xpress  
etc.) are dried ready to be ironed.  
You can use this programme to dry your cotton laundry  
that you have spun at high speeds in your washing  
machine. This programme dries 1 kg cotton laundry (3  
Shirts / 3 T-shirts) in 45 minutes.  
For further programme details, see  
"Programme selection and consumption  
C table"..  
5.5 Main programmes  
Depending on the fabric type, the following main  
programmes are available.  
BabyProtect  
This programme is used for baby clothes that bear  
machine dryable approval on its label.  
Daily  
This programme is used to dry cottons and synthetics  
daily, and lasts for 90 minutes.  
Cottons  
Shirts  
Dry durable laundry with this programme. Dries at  
normal temperature. It is recommended to use for  
your cotton items (bed sheets, quilt covers, towels,  
bathrobes, etc.).  
This programme dries the shirts more sensitively and  
creases them less and thus, helps to iron them more  
easily.  
Synthetics  
There may be a little moisture on the  
shirts at the end of the programme. We  
C recommend you not to leave the shirts in  
the dryer.  
Dry less durable laundry with this programme.  
Recommended for synthetics.  
 
Dryer / User Manual  
16 / 32 EN  
Operating the product  
Delicates  
You can dry your highly delicate laundry (silk blouses,  
fine underwear, etc.) that are suitable for drying or  
laundry which is advised to be hand-washed at a lower  
temperature.  
It is recommended to use a cloth bag  
to avoid certain delicate garments  
C and laundry from getting creased or  
damaged. Take your laundry immediately  
out of the dryer and hang them after the  
programme ends in order to prevent them  
being creased.  
Freshen Up  
Only ventilation is performed for 10 minutes without  
blowing hot air. You can air the clothes that have  
been kept at closed environments for a long time and  
deodorize unpleasant odors thanks to this programme.  
Timer programmes  
You can select one of the 10 min., 20 min., 30 min., 40  
min., 50 min., 60 min., 80 min., 100 min.,  
120 min., 140 min. and 160 min. timer programmes  
to achieve the desired final drying level at low  
temperatures.  
With this programme, the machine dries  
for the time selected regardless of the  
C dryness level.  
 
Dryer / User Manual  
17 / 32 EN  
Operating the product  
5.7 Programme selection and consumption table  
EN  
Spin speed in washing Approximate amount  
Programs  
Capacity (kg)  
Drying time (minutes)  
machine (rpm)  
of remaining humidity  
Cottons / Coloreds  
Extra dry  
7
7
7
1000  
1000  
1000  
% 60  
% 60  
% 60  
175  
156  
125  
A
Cupboard dry  
A
Iron dry  
A
BabyProtect  
3
1.5  
4
1000  
1200  
1200  
1200  
1000  
1000  
1200  
600  
% 60  
%50  
%50  
%50  
%60  
%60  
%50  
%40  
%50  
80  
50  
Shirts  
Jeans  
120  
90  
Daily  
4
Mix  
4
115  
105  
45  
Sports  
4
Xpress  
1
Delicates  
Wool Refresh  
Synthetics  
2
55  
1.5  
600  
8
Cupboard dry  
3.5  
3.5  
800  
800  
% 40  
% 40  
62  
50  
B
Iron dry  
B
Energy consumption values  
Programs  
Capacity (kg)  
7
Energy consumption value kWh per year  
155  
Energy rating star  
6
Cottons-Extra Dry, Drying Level Extra*  
* : Energy Label standard program (AS/NZS 2442)  
All values given in the table have been fixed according to standard laboratory conditions. These values may deviate  
from the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.  
 
Dryer / User Manual  
18 / 32 EN  
Operating the product  
5.8 Auxiliary functions  
Dryness level adjustment selection  
Dryness level adjustment button is used to adjust  
the required dryness level. Programme duration can  
change depending on the selection.  
Audio Warning  
The machine will give an audio warning when the  
programme comes to an end. Use the Audio Warning  
Level button to adjust the sound level.  
You can activate this function only before  
the programme has started.  
You can change the sound level either  
before the programme starts or while the  
C programme is in progress.  
C
Drying level damp  
Volume level low  
Volume level high  
Drying level normal  
Drying level extra  
 
Dryer / User Manual  
19 / 32 EN  
Operating the product  
Anti-creasing  
Anti-creasing symbol will illuminate at the  
end of the programme if Anti-creasing  
Anti-creasing programme duration may be  
changed with the Anti-creasing selection button. You  
can use Anti-creasing function to prevent laundry from  
creasing if you will not take the laundry out after the  
program has come to an end. This programme rotates  
the laundry in every 240 second for selected time to  
prevent creasing.Following images identify the level  
changes.  
C function is activated.  
Favourite selection button  
A programme with the set auxiliary function is saved  
with Favourite selection button.When the product is  
switched on and off, features of the saved programme is  
displayed by means of Favourite selection button.  
1. Select the programme with the programme knob;  
select the auxiliary functions such as Anti-creasing,  
Dryness Level etc.  
2. Press and hold the Favourite selection button for  
about 3 seconds. Features of set programme will  
be saved.  
Anti-creasing 0 minute  
Anti-creasing 30 minute  
Anti-creasing 60 minute  
5.9 Warning symbols  
Warning symbols may differ according to  
the model of your machine.  
C
Lint filter cleaning  
When the programme is completed, a warning symbol  
will appear to remind that the filter needs to be cleaned.  
If the Filter Cleaning symbol flashes  
continuously, refer to “Troubleshooting”  
C section.  
Water tank  
When the programme is completed, a warning symbol  
will appear to remind that the water tank needs to be  
drained.  
Anti-creasing 120 minute  
If the water tank becomes full while the programme  
is running, the warning symbol will start to flash and  
machine will pause. Drain the water in the water  
tank and press Start / Pause button to resume the  
programme. The warning symbol turns off and the  
programme resumes operating.  
Press Anti-creasing button to activate  
this function.  
C
 
Dryer / User Manual  
20 / 32 EN  
Operating the product  
Additional laundry may be loaded / taken  
out during the End time. At the end of  
C the countdown process, end time symbol  
disappears, drying process starts and the  
programme duration is displayed. The  
time on the display is the total of normal  
drying time and end time.  
Cleaning the filter drawer  
Warning symbol flashes with certain intervals to remind  
that the filter drawer needs to be cleaned.  
Changing the End time  
If you want to change the time during countdown:  
1. Press On/Off/Cancel button for 3 seconds to  
cancel the programme. Restart the machine and  
repeat the Delay Setting procedure for the desired  
time.  
2. When your machine is operated for the first time,  
it starts with the declaration programme (wardrobe  
dryness for cottons.  
Loading door open  
This warning symbol Pause appears and programme  
progress symbol flashes when the loading door of the  
dryer is open.  
Cancelling the end time  
If you want to cancel the End time countdown and start  
the programme immediately:  
1. Press On/Off/Cancel button for 3 seconds to  
cancel the programme.  
2. Press On/Off/Cancel button to start the  
programme you have previously selected.  
5.10 Starting the programme  
Press the Start/Pause button to start the program.  
Start symbol will light up to indicate that the  
programme has started and ":" symbol in the middle  
of the remaining time will keep flashing. Progress of  
Programme Symbol flashes on the screen.  
End time  
With the End Time function, the end time of the  
programme may be delayed up to 24 hours.  
1. Open the loading door and put the laundry in.  
2. Select the drying programme, spin speed and, if  
required, the auxiliary functions.  
5.11.Progress of programme  
3. Press End time button to set the desired time  
delay. End time symbol flashes on the display.  
(When the button is pressed on, End time  
proceeds continuously)  
4. Press Start / Pause button. End time starts  
countdown and Start symbol lights up on the  
display. The “:” in the middle of the displayed delay  
time flashes.  
 
Dryer / User Manual  
21 / 32 EN  
Operating the product  
5.12 Child Lock  
5.13 Changing the programme after it  
Machine is equipped with a Childproof Lock which  
prevents interfering with the current programme flow  
by pressing any button. All buttons except the On/Off/  
Cancel button on the control panel are deactivated  
when the Child-proof Lock is active.  
has started  
After the machine starts, you can change the selected  
programme and dry your laundry in a different  
programme.  
1. If you want to select Extra Dry programme instead  
of Iron Dry programme, press and hold the Start /  
Pause button to stop the programme.  
2. Select Extra Dry programme by turning the  
Programme Selection knob.  
In order to activate the Childproof Lock, press Anti-  
creasing button for 3 seconds.  
To start a new programme after the current programme  
is over or to interrupt the current programme, the  
Child-proof Lock should be deactivated. Press the same  
button for 3 seconds again to deactivate the Child-  
proof Lock.  
3. Press the Start/Pause button to start the  
program.  
Adding / removing laundry in Pause mode  
In order to add or take out laundry after the drying  
programme has started:  
1.Press Start/Pause button to switch the machine to  
Pause mode. Drying process will stop.  
2.While in Pause mode, open the loading door, add or  
take out laundry and close the loading door.  
3.Press the Start/Pause button to start the program.  
Lock symbol will appear on the display  
when the Child-proof Lock is activated.  
C
Any laundry added after the drying  
process has started may cause the  
C clothes that are already dried in the  
machine intermingle with wet clothes and  
the result will be wet laundry after the  
drying process is over.  
Child-proof Lock is deactivated when the  
machine is switched off and on with On/  
C Off/Cancel button.  
You may repeat laundry adding or  
removing process as many times as  
C you desire during drying. However, this  
process will increase the programme time  
and energy consumption since the drying  
process will be interrupted repeatedly.  
Therefore, it is recommended to add  
laundry before the drying programme has  
started.  
When the Child-proof Lock is activated:  
Display symbols will not change even if the position  
of Programme Selection knob is changed while the  
machine is running or in halt.  
If you select a new programme by turning  
the Programme Selection knob while  
C your machine is in Pause mode, then  
the current program is aborted and new  
programme information is displayed.  
CAUTION: Do not touch the inner surface  
of the drum when adding or taking out  
laundry while a programme is running.  
Surfaces of the drum are hot.  
 
Dryer / User Manual  
22 / 32 EN  
Operating the product  
5.14 Canceling the programme  
If you want to stop drying and cancel the programme for  
any reason after the machine has started to run, press  
and hold the On/Off/Cancel button for 3 seconds.  
CAUTION: As the inside of the machine  
will be excessively hot when you cancel  
A the program while the machine is  
running, activate the ventilation program  
to cool it down.  
5.15 End of programme  
Lint Filter Cleaning and Water Tank warning symbols  
light up in the programme follow-up indicator when the  
programme comes to an end. The loading door can be  
opened and the machine becomes ready for a second  
cycle.  
Press On/Off/Cancel button to switch off the machine.  
If Anti-creasing function is activated and  
the laundry is not taken from the machine  
C at the end of the programme, 2-hours  
(depends on selection) Anti-creasing  
programme is activated.  
Clean the lint filter after each drying.  
(See "Lint Filter and Loading Door Inner  
C Surface")  
Drain the water tank after each drying  
cycle. (See "Draining the water tank")  
C
 
Dryer / User Manual  
23 / 32 EN  
6 Maintenance and cleaning  
Service life of product extends and frequently  
experienced problems will be reduced if it is cleaned at  
regular intervals.  
6.1 Cleaning Lint Filter / Loading Door  
Inner Surface  
Lint and fiber released from the laundry to the air during  
the drying cycle are collected in the Lint Filter.  
Clean the entire inner surface of the loading door  
and loading door gasket with a soft damp cloth.  
Such fiber and lint are generally formed  
during wearing and washing.  
C
A
Always clean the lint filter and the inner  
surfaces of the loading door after each  
drying process.  
You can clean the lint filter housing with a  
vacuum cleaner.  
C
To clean the lint filter:  
Open the loading door.  
Remove the lint filter by pulling it up and open the  
lint filter.  
Clean lint, fiber, and cotton raveling by hand or with  
a soft piece of cloth.  
Close the lint filter and place it back into its  
housing.  
6.2 Cleaning the sensor  
There are dampness sensors in the dryer that detect  
whether the laundry is dry or not.  
To clean the sensors:  
Open the loading doorof the dryer.  
Allow the machine to cool down if it is still hot due  
to the drying process.  
Wipe the metal surfaces of the sensor with a soft  
cloth, dampened with vinegar and dry them.  
A layer can build up on the filter pores that can  
cause clogging of the filter after using the dryer  
for a while. Wash the lint filter with warm water  
to remove the layer that builds up on the lint  
filter surface. Dry the lint filter completely before  
reinstalling it.  
Clean metal surfaces of the sensors 4  
times a year.  
C
C
Do not use metal tools when cleaning  
metal surfaces of the sensors.  
 
Dryer / User Manual  
24 / 32 EN  
Maintenance and cleaning  
Drain the water in the tank.  
Never use solvents, cleaning agents or  
similar substances for cleaning due to the  
risk of fire and explosion!  
A
If there is lint accumulation in the funnel of the  
water tank, clean it under running water.  
Place the water tank into its seat.  
If the direct water draining is used as  
an option, there is no need to empty the  
C
water tank.  
6.4 Cleaning the filter drawer  
Lint and fiber that could not be captured by the lint  
filter are blocked in the filter drawer behind the kick  
plate. Filter Drawer Cleaning warning light will light up  
maximum at every 5 drying cycles as a reminder.  
There is a two-level filter in the filter drawer. Te first level  
is the filter drawer sponge and the second level is the  
filter cloth.  
6.3 Draining the water tank  
Dampness of the laundry is removed and condensed  
during drying process and the water that arise  
accumulates in the water tank. Drain the water tank  
after each drying cycle.  
Condensed water is not drinkable!  
A
To clean the filter drawer:  
Press the kick plate button to open the kick plate.  
Never remove the water tank when the  
program is running!  
A
If you forget to drain the water tank, the machine will  
stop during the subsequent drying cycles when the  
water tank is full and the Water Tank warning symbol  
will flash. If this is the case, drain the water tank and  
press Start / Pause button to resume the drying cycle.  
To drain the water tank:  
Pull the drawer and remove the water tank carefully.  
Remove the filter drawer cover by turning it in the  
direction of arrow.  
 
Dryer / User Manual  
25 / 32 EN  
Maintenance and cleaning  
Pull out the filter drawer.  
Wash the filter drawer sponge by hand to remove  
the fiber and lint on the surface. After washing the  
sponge, squeeze it by hand and remove the excess  
water. Well-dry the sponge before storing it.  
It is not necessary to clean the sponge  
if lint and fiber accumulation on it is not  
significant.  
C
Place the sponge back into its place.  
Open the filter drawer by pressing the red button.  
Close the filter drawer as to lock the red button.  
Take out the filter drawer sponge.  
Place the filter drawer back into its place, turn the  
filter drawer cover in the arrow direction and close  
it securely.  
Clean lint, fiber, and cotton raveling on the filter  
cloth by hand or with a soft piece of cloth.  
When you notice a layer that may lead clogging on  
the filter cloth, please clean the layer by washing  
in warm water. Let the filter cloth dry thoroughly  
before installing back the filter drawer.  
 
Dryer / User Manual  
26 / 32 EN  
Maintenance and cleaning  
Close the kick plate cover.  
Drying without the filter drawer sponge in  
place will damage the machine!  
A
C
A dirty lint filter and filter drawer will cause  
longer drying periods and higher energy  
consumption.  
6.5 Cleaning the evaporator  
Clean the lint accumulated on the fins of the evaporator  
located behind the filter drawer with a vacuum cleaner.  
You can also clean by hand provided that  
you wear protective gloves. Do not attempt  
to clean with bare hands. Evaporator fins  
can harm your hand.  
A
 
Dryer / User Manual  
27 / 32 EN  
7 Troubleshooting  
Drying process takes too much time.  
Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.  
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.  
Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any)  
that block ventilation in front of the ventilation grids.  
Ventilation is not sufficient since the room where the machine is installed is very small. >>> Open the  
door and window of the room to avoid the room temperature increase too much.  
Lime deposit has built up on the dampness sensor. >>> Clean the dampness sensor.  
Excessive laundry is loaded. >>> Do not load the dryer in excess.  
Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your washing  
machine.  
Laundry comes out wet at the end of drying.  
After drying, the hot clothes feel damper than their actual dampness level.  
C
It is likely that the selected programme did not suit the laundry type.>>>Checking the care labels on  
clothes, select appropriate programme for the laundry type or use timer programmes in  
addition.  
Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.  
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.  
Excessive laundry is loaded. >>> Do not load the dryer in excess.  
Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your washing  
machine.  
Dryer does not switch on or the programme does not start. Dryer does not start when it is set.  
It is not plugged in. >>> Make sure that the machine is plugged in.  
The loading door is ajar. >>> Make sure that the loading door is closed securely.  
Programme is not selected or the Start / Pause / Cancel button is not pressed. >>> Make sure that the  
programme is selected and the machine is not in Pause mode.  
Childproof Lock is activated. >>> Deactivate the Childproof Lock.  
Programme is interrupted without any cause.  
Loading door is ajar. >>> Make sure that the loading door is closed securely.  
There was a power failure. >>> Press Start / Pause / Cancel button to start the programme.  
Water tank is full. >>> Drain the water tank.  
Laundry has shrunk, become felted or deteriorated.  
A programme suitable for the laundry type is not used. >>> Check the garment tag and select a  
programme suitable for the fabric type.  
Drum lighting does not turn on. (On models with lamp)  
Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is switched on.  
Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.  
End/Anti-creasing symbol is on.  
Anti-creasing programme is activated in order to prevent laundry that has remained in the machine from  
creasing. >>> Turn off the dryer and take out the laundry.  
End symbol is on.  
Programme is over. Turn off the dryer and take out the laundry.  
 
Dryer / User Manual  
28 / 32 EN  
Troubleshooting  
Lint Filter Cleaning symbol is on.  
Lint filter is not cleaned. >>> Clean the lint filter.  
Lint Filter Cleaning symbol is flashing.  
Filter housing is clogged with lints. >>> Clean the lint filter housing.  
A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with  
warm water.  
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.  
Water leaks from the loading door  
Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door  
gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading  
door gasket.  
Loading door opens spontaneously.  
Loading door is ajar. >>> Push the loading door to close until you hear a locking sound.  
Water Tank warning symbol is on/flashing.  
Water tank is full. >>> Drain the water tank.  
Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water  
drain hose.  
Filter Drawer Cleaning warning symbol is flashing.  
Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.  
If you cannot eliminate the problem although you follow the instructions in this section, consult your  
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.  
A
 
Dryer / User Manual  
29 / 32 EN  
 
 
 

3Com Model Vehicle Version 812 User Manual
3Com Switch 3C17300 User Manual
3M Food Saver 39800 User Manual
ADC Stereo Amplifier Tower Mounted Amplifiers User Manual
Advantech Computer Hardware AIMB 210 User Manual
Akai Projection Television PT50DL14 User Manual
AKG Acoustics Headphones K 518 LE User Manual
Albatron Technology Computer Monitor EM215 User Manual
Alpine Car Speaker PWE S8 User Manual
Bakers Pride Oven Food Warmer MDW User Manual